673400
18
Zoom out
Zoom in
Previous page
1/84
Next page
Press 9 / to open the cassette compartment.
Insert the cassette.
When monitoring during
recording, adjust the
sound using the controls
VOLUME and UBS.
These controls do not
affect the recording.
Start recording by pressing 0.
(the A button is automatically also pressed).
When the end of the tape is reached, the
recorder buttons are released.
To interrupt recording, press
;.
To continue recording, press
; again.
Press 9 / if you want to stop recording
before the end of the tape.
On pressing again, the cassette compartment
will open.
The set is switched off if the Function switch is
in position TAPE/OFF and no buttons are
pressed.
Power Supply
Mains operation ..................230 Volt, 50/60 Hz
Battery operation...8 x 1.5 V (R20, UM-1, ‘D’-cells)
Output power
Output power ......................................2 x 1 W
Headphone jack .....................ø 3.5 mm (stereo)
Radio section
Wavebands:......................FM 87.5 – 108 MHz
..................................MW 526 – 1606.5 kHz
Aerials:...........................Telescopic aerial for FM
..........................Built in ferrite rod aerial for MW
Cassette section
Cassette:............Compact cassette to DIN 45516
Track system:...................International quartertrack
Tape speed: .................................4.76 cm/sec.
Motor: ...............................................DC motor
Frequency range:.......................80 Hz – 10 kHz
Automatic functions: ..Automatic recording level control
....................Automatic button release at tape end
CD section
Frequency range:.......................20 Hz – 20 kHz
S/N ratio .......................................65 dB (wtd)
Accessories
....................................................Mains Cable
.................................................Warranty sheet
............................................Instructions for Use
General
Dimensions (W x H x D) .....390 x 180 x 240 mm
Weight (w/o batteries).................approx. 2.8 Kg
Subject to technical alterations and alterations in
styling E. and O.E.
Recording from the CD-player
(CD synchro recording)
Set the Function switch to CD.
It is not necessary to start the CD player
separately: by pressing 0 the CD player
starts automatically.
If the CD player is in STOP position,
recording will start from the beginning of
the CD (or from the beginning of the
programmed selection).
To start a recording in the middle of a
track, play the CD in the normal way.
As soon as the desired passage is reached,
pause the CD and then start recording by
pressing 0.
Recording from the radio
Set the Function selector to RADIO.
Select the wave band using the BAND
switch.
In case of FM radio recordings, set the
STEREO •• MONO switch to the desired
position.
Tune to desired radio station using the
TUNING control.
Start recording by pressing 0.
CD SYNC.
CASSETTE DECK
18
Cassette recording
TECHNICAL DATA
GB
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig RR 300 CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig RR 300 CD in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info