20
Setting the clock
When you first use the device, you first have to set the clock.
1 With the device switched off, keep pressing »MODE« until the time
flashes in the display.
Note:
If you do not press any button within 5 seconds, the device will quit set-up
mode. Any altered settings will be stored.
2 Press »HOUR –« briefly to set the hours step-by-step or hold it down to
run through the hours quickly.
3 Press »MIN
+
« briefly to set the minutes step-by-step or hold it down to
run through the minutes quickly.
Note:
When the minute display changes from »59« to »00«, this does not
affect the hour display.
4 Press »MODE« to confirm the setting.
– Display: the current time.
Setting the alarm time
1 Press »ON/OFF« to switch off the device.
– Display: the current time.
2 Press »MODE« briefly.
– Display: the alarm time most recently set, »
ɷ
« or »e« flash.
3 Hold down »MODE« until the alarm time flashes in the display.
Note:
If you do not press any button within 5 seconds, the device will quit set-up
mode. Any altered settings will be stored.
4 Press »HOUR –« briefly to set the hours step-by-step or hold it down to
run through the hours quickly.
5 Press »
MIN +
« briefly to set the minutes step-by-step or hold it down to
run through the minutes quickly.
Note:
When the minute display changes from »59« to »00«, this does not
affect the hour display.
6 Press »MODE« to confirm the setting.
– Display: the set alarm time, »
ɷ
« or »e« flash.
– After a short time, the display changes to the current time.
SETTINGS
______________________________________________
1200
1625
21 49
550
ɷ
620
ɷ
21 51
:
:
:
:
:
:
