157243
17
Zoom out
Zoom in
Previous page
1/20
Next page
Setting the clock
The clock will display in 24-hour mode, e.g.
00:00 or 23:59.
1 Press TIMER
˚.
–“00:00” starts flashing.
2 Press SET CLOCK.
3 Set the hour with 4 or 3.
4 Set the minute with Q or R.
5 Press SET CLOCK again to store the setting.
The clock starts running.
Note:
When a power interruption occurs, the clock
settings are erased, and “0:00” will flash on
the display.
To set the time with RDS clock, see “RECEIVING
RDS RADIO STATION” under TUNER section.
Setting the Timer
The system can switch on to CD, TUNER or
TAPE 1 mode automatically at a preset time.
It can serve as an alarm to wake you up.
After half an hour from the preset time, the
system will return to the standby mode if no
button is pressed.
Before setting the timer, make sure the clock is
set correctly.
The timer works only once for each setting.
The volume of the timer will be at the last
setting before the set is switched off.
CLOCK SETTING TIMER SETTING
33
M27 page 33
GB
TIMER
TIMER SET
PRESET TUNING
SHUFFLE
PLAY
MODE
SIDE
BAND
RECORD
DUBBING
CD TAPE
PROGRAM
CLEAR
1
2
3
TIMER
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
FRONT
BACK
RECORD
HSD
SET CLOCK
RDS
MODE
PRESET TUNING
SHUFFLE
PLAY
MODE
SIDE
BAND
RECORD
DUBBING
CD TAPE
PROGRAM
CLEAR
RDS
MODE
1
2
3
TIMER
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
FRONT
BACK
RECORD
HSD
TIMER
SET CLOCK
TIMER SET
SET CLOCK
RDS
MODE
TIMER
PRESET TUNING
SHUFFLE
PLAY
MODE
SIDE
BAND
RECORD
DUBBING
CD TAPE
PROGRAM
CLEAR
1
2
3
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
FRONT
BACK
RECORD
HSD
TIMER SET
TIMER
SET CLOCK
RDS
MODE
TIMER
PRESET TUNING
SHUFFLE
PLAY
MODE
SIDE
BAND
RECORD
DUBBING
CD TAPE
PROGRAM
CLEAR
1
2
3
DBB
PROGRAM
AMPM
SHUFFLE
FMMW
LWSW
STEREO
NR
FRONT
BACK
RECORD
HSD
TIMER SET
TIMER
Timer Setting
1 Press TIMER ˚.
2 Press TIMER SET.
The
TIMER flag flashes.
3 Press 4 or 3 to select the desired source.
The display will switch as follows:
TUNER –> CD –> TAPE 1 –> TUNER .
4 Press TIMER SET to confirm your selection.
The display will show “ ON 00:00 “ and
00:00“ flashes.
5 Press 4 or 3 to set the hour for the timer to
start.
6 Press Q or R to set the minutes for the
timer to start.
7 Press TIMER SET to store the start time.
The TIMER is now set.
The
TIMER flag remains lit.
To stop the timer
1 Press TIMER
˚.
2 Press TIMER on the set.
The TIMER is now off.
To start the timer again
1 Press TIMER
˚.
2 Press TIMER on the set.
The display will show the last set start time of
the TIMER and its flag.
The
TIMER flag remains lit.
Notes:
1 If the source selected is TUNER, the last tuned
frequency will be switched on.
2 If the source selected is CD, the first track of the
last selected disc will be played. If the CD trays
are empty, the TUNER source will be selected
instead.
3 If the source selected is TAPE 1, and the preset
time is reached during high speed dubbing, the
TUNER source will be selected instead.
TIMER
INFRARED
SENSOR
TIMER
SET CLOCK
TIMER
TIMER SET
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig m 27 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig m 27 c in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info