570082
14
Zoom out
Zoom in
Previous page
1/27
Next page
ENGLISH
14
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
3 Press »INFO« on the remote control to switch
to the time display for the DAB radio station
and confirm the time with »eII«.
Display: »CT SYNC«, the time is adopted.
Note:
7
Some RDS stations (FM radio stations) trans-
mit an RDS time signal. If the selected RDS
station transmits time information, the time
can be updated automatically.
In FM tuner mode, press »RDS« repeat-
edly until the time is displayed. If »DATE/
CLOCK« is displayed, the time signal has
not yet been received. Please wait until the
time is displayed.
If the correct time is displayed, press and
hold » « to confirm it.
Setting the time manually
The time can also be set manually.
1 Switch off the hi-fi by pressing »8«.
2 To set the time in standby mode, press and
hold »¥« for about 2 seconds.
Display: »CLOCK SET« and then
»CLOCK 24 HR«.
2 Select the hour format (12 or 24 hours) by
pressing »VOLUME« on the device or by
pressing »5« or »6« on the remote control
and confirm with »¥«.
The hours flash.
3 Set the hours by pressing »VOLUME« on the
device or by pressing »5« or »6« on the re-
mote control and confirm with »¥«.
The minutes flash.
4 Set the minutes by pressing »VOLUME« on the
device or by pressing »5« or »6« on the re-
mote control and confirm with »¥«.
– Display: the current time.
Setting and storing FM radio
stations automatically
The device searches for up to 40 stations with
strong reception and stores them automatically.
After the search has finished, you will hear the
station stored at preset 01.
1 Activate the station search by pressing
»PROG« until the frequency display changes
to rapid run-through.
Display: »AUTO SCAN«.
Setting and storing FM radio
stations manually
1 Set the radio station by briefly pressing »3«
or »4« repeatedly on the remote control.
Display: the frequency changes in steps of
50 kHz;
or
press and hold down »3« or »4« on the
remote control until the frequency changes to
rapid run-through.
2 Save a radio station as a preset by pressing
»PROG«, selecting the preset with »5« or
»6« on the remote control and then press
»PROG« to save.
3 To search and save more radio stations, repeat
steps 1 to 2.
Setting the time automatically
The time is updated automatically if a DAB or
RDS radio station transmits a time signal.
Note:
7
The time must be reset after a power failure
or after disconnecting from the mains.
1 Select the DAB input source by pressing
»SOURCE« on the device or »FM/DAB« on
the remote control.
2 Select a DAB radio station by pressing » « or
» « on the device »5« or »6« on the remote
control.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig M 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig M 2200 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig M 2200

Grundig M 2200 User Manual - German - 27 pages

Grundig M 2200 User Manual - Dutch - 17 pages

Grundig M 2200 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info