570082
13
Zoom out
Zoom in
Previous page
1/27
Next page
13
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Tuning and storing DAB radio
stations
Initial setup
When the device is connected to the mains for
the first time or after a reset, the device starts an
automatic station search for DAB radio stations
and then stores them in the station list.
1 Switch on the hi-fi system by pressing »FM/
DAB« on the remote control.
Display: »Hello« briefly, followed by
»DAB« and then »QUICK SCAN«.
The automatic station search starts and finds
and stores DAB radio stations.
Then the device switches to the first station in
the station list.
Note:
7
If there is no antenna signal, »NO SIGNAL«
is displayed.
Storing DAB radio stations as
presets
After the automatic station search, all the DAB
radio stations in are stored in the station list. You
can store your favourite DAB radio stations on
the presets 1 to 40.
1 Select a DAB radio station by pressing »3«
or »4« on the remote control and activate
by pressing »eII«.
2 Save a DAB radio station as a preset by press-
ing »PROG«, selecting the preset with »5«
or »6« on the remote control and then press
»PROG« to save.
Display: »P01 SAVED«.
Note:
7
You can also select the preset with the number
buttons »1 ... 0«.
For two-digit preset numbers, first press
»10+«. The "10s place" then stays selected.
3 To search and save more DAB radio stations,
repeat steps 1 to 2.
Add DAB radio stations after a
change of location
You can restart the automatic station search. This
is useful if you want to operate the device at a
new location or if you want to search for new
DAB radio stations.
1 In DAB mode, press »SCAN INTRO«.
Display: »QUICK SCAN«.
The automatic station search starts and finds
and stores DAB radio stations in the station
list.
Then the device switches to the first station in
the station list.
Setting and storing DAB radio
manually
1 In DAB tuner mode, press and hold » «.
Display: e.g. »5A I74.928« (channel and
frequency of a DAB radio station).
2 Set the frequency/channel by pressing »3«
or »4« on the remote control.
3 Confirm the frequency/channel with » «.
Tuning and storing FM radio sta-
tions
You can store up to 40 FM radio stations on pre-
set channels.
1 Switch on the hi-fi system by pressing »8«,
»SOURCE« on the device or »FM/DAB« on
the remote control.
2 Select the FM TUNER input source by pressing
»SOURCE« on the device or »FM/DAB« on
the remote control.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig M 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig M 2200 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig M 2200

Grundig M 2200 User Manual - German - 27 pages

Grundig M 2200 User Manual - Dutch - 17 pages

Grundig M 2200 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info