645170
29
Zoom out
Zoom in
Previous page
1/40
Next page
Child Lock
With the Child Lock function, you can
prevent children from tampering with
the machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off the
machine with On / Off button
when the Child Lock is active.
When you switch on the machine
again, programme will resume
from where it has stopped.
To activate the Child Lock:
* Hold down the button for the 1st
Auxilliary Function for 3 seconds.
"Child Lock Enabled" appears on the
display after the countdown as "3_2_1"
in the programme selection display on
the panel. When this warning appears,
the
1st Auxilliary Function button can
be released.
To deactivate the Child Lock:
* Keep the auxiliary function button
pressed for 3 seconds. After the
countdown as "3_2_1" on the
programme selection display on the
panel is over, "Child Lock Enabled"
symbol turns off.
Cancelling the programme
The programme is cancelled when the
machine is turned off and on again.
Press and hold
On / Off button for 3
seconds.
C
If you press On/Off button when
the Child Lock is enabled, the
programme will not be cancelled.
You should cancel the Child Lock
first.
C
If you want to open the loading
door after you have cancelled the
programme but it is not possible
to open the loading door since the
water level in the machine is above
the loading door opening, then
turn the Programme Selection
knob to Spin + Drain programme
and discharge the water in the
machine.
End of programme
Once the programme is completed,
End LED will light up.
If you do not press any button for 10
minutes, the machine will switch to
OFF mode. Display and all indicators
are turned off.
When you press On/Off button, the
completed programme steps will be
displayed.
Setting volume level
Low volume and high volume
To modify the volume, hold down the
2nd Additional Function button for 3
seconds.
Your machine is equipped
with a "Standby Mode"
In case of not starting any programme
or waiting without making any other
operation while the machine is in the
selection step after it is turned on by
On/Off button or if no other operation
is performed approximately 10 minutes
after the programme you selected has
come to an end, your machine will
switch to OFF mode. Display and all
indicators are turned off. When you
press On/Off button, information about
the selected programme is displayed.
Please check the correctness of
your selections before starting the
programme. Readjust if necessary.
This is not a failure.
29
EN
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWN 36431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWN 36431 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GWN 36431

Grundig GWN 36431 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info