645170
28
Zoom out
Zoom in
Previous page
1/40
Next page
C
Additional laundry may be loaded
during the End Time countdown
period. At the end of the countdown,
End Time indicator turns off,
washing cycle starts and the time
of the selected programme appears
on the display.
When the End Time selection is
completed, the time appears on
the screen consists of end time
plus the duration of the selected
programme.
Changing the End Time duration
Press the End Time button. Every time
the button is pressed, the period will
change in 3-hour increments and the
light of the selected End Time will turn
on.
Cancelling the End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
* Set the End Time from zero
(delete all end time displays)
or hold down the On/Off button
for 3 seconds. The End Time is
cancelled when the machine is
turned off and on again.
* Then, select the programme you
want to run again.
* Start the programme with the
Start/Pause button.
Starting the programme
* Start the programme with the
Start/Pause button.
* Programme follow-up light
showing the startup of the
programme will turn on.
C
Machine returns to OFF mode
when no programme is started or
no button is pressed in 10 minutes
during the programme selection.
Display and all indicators are
turned off.
When you press On/Off button,
information about the selected
programme is displayed.
Door lock
There is a locking system on the
loading door of the machine that
prevents opening of the door in cases
when the water level is unsuitable.
"Door Locked" LED in the panel turns
on when the loading door is locked.
Changes after programme
has started
Adding laundry after the programme has
started:
Stopping the machine (pause)
Press the Start/Pause button to switch
the machine to pause mode while a
programme is running. The Start/
Pause and the light for the step which
the machine is in start flashing in
the programme follow-up indicator
to show that the machine has been
switched to the pause mode. Also,
the loading door light flashes until it
is possible to open the door. Loading
Door light shall be turned off once the
loading door is ready to be opened, but
the programme step light and Start/
Pause light continue to flash.
Also, when the loading door is ready to
be opened, Loading Door light will also
turn off in addition to the programme
step light.
Changing the auxiliary function, speed
and temperature
Depending on the step the programme
has reached, you can cancel or activate
the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and
temperature settings; see, "Spin
speed selection" and "Temperature
selection".
C
If no change is allowed, the
relevant light will flash for 3 times.
Adding or taking out laundry
* Press the Start / Pause button
to pause the machine. The
programme follow-up light of the
relevant step during which the
machine was switched into the
pause mode will flash.
* Wait until the Loading Door can
be opened.
* Open the Loading Door and add
or take out the laundry.
* Close the Loading Door.
* Make changes in auxiliary
functions, temperature and speed
settings if necessary.
* Press Start/Pause button to start
the machine.
28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWN 36431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWN 36431 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GWN 36431

Grundig GWN 36431 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info