712279

Grundig GTN 482610 GCH Manual

72
Zoom out
Zoom in
Previous page
1/84
Next page
72
When the child lock is active:
The machine runs, or in stand-by
state the indicator symbols
won’t change upon changing the
position of the program selection
button.
6.13 Changing the program after
it is started
You can change the program you
selected to dry your laundry with a
different program after the machine
starts running.
• For example, to select Extra Dry
instead of Iron Dry, pause the
program by pressing the Start /
Stand-by button.
• Select the Extra Dry program
using the Program Selection
button.
• Press the Start/Stand-by button
to start the program.
Adding and removing clothes
during stand-by
If you want to add or remove clothes
to/from the machine after the drying
program starts:
• Press the Start/Stand-by button
to put the machine in Stand-by
state. The drying operation stops.
• Open the loading door while in
Stand-by state, and close the
door after you remove or add
laundry.
• Press the Start/Stand-by button
to start the program.
C
Adding laundry after the
drying operation starts may
cause the dried laundry
inside the machine to mix
with wet laundry and leave
the laundry damp at the
end of operation.
C
Adding or removing laundry
during drying may be
repeated as many times as
you wish. But this operation
continuously interrupts the
drying operation, and thus
increases program duration
and energy consumption.
So, it is recommended to
add laundry before the
program starts.
C
If a new program is
selected by turning the
program selection knob
while the machine is in
stand-by; the running
program terminates and
new program information is
displayed on the screen.
WARNING: Do not touch the
inner surface of the drum
while adding or removing
clothes during a continuing
program. The drum surface
is hot.
6.14 Cancelling the program
If you want to cancel the program and
terminate the drying operation for
any reason after the machine starts
running, keep the On/Off/Cancel
button pressed for 3 seconds.
A
WARNING: The inside of the
machine shall be extremely
hot when you cancel the
program during machine
operation, so run the
ventilation program to allow
it to cool down.
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GTN 482610 GCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GTN 482610 GCH in the language / languages: English, German as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info