712279

Grundig GTN 482610 GCH Manual

70
Zoom out
Zoom in
Previous page
1/84
Next page
70
Exit the menu by saving the settings
pressing Wrinkle Prevention button.
User may select the desired program
and operate the machine.
6.9 Warning symbols
C
Warning symbols may vary
depending on the model of
your machine.
Fibre filter cleaning
When the program is completed, the
warning symbol for filter cleaning
turns on.
C
Refer to “Troubleshooting”
section if filter cleaning
symbol constantly flashes.
Water tank
When the program is completed, the
warning symbol to empty the water
tank turns on.
If the water tank fills up while the
program continues, the warning
symbol starts flashing and the
machine goes into stand-by. In this
case, empty the water tank and start
the program by pressing the Start
/ Stand-by button. Warning symbol
turns off and program resumes.
Cleaning the filter drawer
Warning symbol flashes periodically
to remind that filter drawer must be
cleaned.
Loading cover is open
Following warnings are displayed
respectively if the loading cover of the
drying machine is open.
Door is open
Program Paused
Delay Setting
• You can delay the end time of the
program up to 24 hours with the
Delay Setting function.
• Open the loading door and place
the laundry.
• Select drying program, spin
cycle and if needed, additional
functions.
• Press the Delay Setting selection
button and set the delay time you
wish. Delay Setting symbol turns
on. (When the button is pressed
and hold pressed, Delay Setting
proceeds non-stop).
• Press the Start / Stand-by
button. Delay Setting countdown
starts and Delay Activated and
Program Started messages
are displayed on the screen.
“:” Separator in the middle of
displayed delay time flashes.
Program Started
End Time Enabled
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GTN 482610 GCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GTN 482610 GCH in the language / languages: English, German as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info