574854
15
Zoom out
Zoom in
Previous page
1/18
Next page
13
7 DESCALING THE MACHINE
When the message “DESCALING” appears on the display with the
machine off, it is time to descale your machine using specific
products that are appropriate for coffee machines.
Attention Very Important!
Do not use lemon-based products for descaling. These
products contain citric acid, which in contact with calcium
at high temperatures forms a chemical reaction, creating
calcium citrate that could lead to the total obstruction of
the water circuits.
Proceed as follows:
Open the drawer and remove the water from the tray and any
coffee grounds from the container. Re-close the drawer without
replacing the grille, and position the steam nozzle so that the
water that comes out of it falls into the tray.
?Switch on the machine and wait till the word STEAM has
stopped flashing.
?Switch off the machine and go into programming mode by
pressing the key for 3 seconds until the displays shows
“PROGRAMMING”.
?Select the descaling function using the keys
and “DESCALING” appears on the display panel.
?Press and hold the two keys together and then
The machine prepares for descaling. When you hear the beep of
confirmation, the message DESCALING STEP 01 appears on the
display.
DESCALING STEP 01:
Fill the tank halfway full with the descaling product then press .
DESCALING STEP 02:
keep the button pressed.
DESCALING STEP 03:
machine starts to delivery water from nozzles,
keep the button pressed till the end of the cycle.
DESCALING STEP 04:
empty and clean the water tank, then refill it with over 1 litre of
fresh water, then press .
CLEANING STEP 05:
keep the button pressed untill 1 litre of water is dispensed from
the machine, wait for the end of the cycle.
Fill the tank with water and wait until the coffee and water
temperatures are reached.
The manufacturer declines all responsibility for any
damage caused by failure to carry out descaling.
Solution: there is a problem with the coffee heater; before calling
the technical service, please try to switch off and switch on the
machine.
ALARMS
The display panel could shows these alarms signs:
SERVICE
SERVICE
WATER PRESSURE
0
3
1
GRINDER LOCK
2
Solution: before calling the technical service,
check the water tank and press the key
Solution: before calling the technical service, check for the
presence of foreign bodies in the grinder (stones, impurities, other
foreign bodies). If necessary use a vacuum cleaner to suck up all
the beans.
Then
and reset the machine by pressing the key
reset the machine by pressing the key
THE MACHINE IS WORKING PROPERLY BUT WARNS OF THE NEED
TO BE SERVICED IN ORDER TO KEEP THE GUARANTEE.
MAINTENANCE
CALL SERVICE
If the display shows:
8 TROUBLE - SHOOTING
The machine does not switch on
- The main switch is off
- No electricity
The coffee does not come out or comes out in slow drips
- Coffee grind too fine (increase the grinder set)
- Coffee machine pipes obstructed:
The coffee comes out too fast and is not creamy
- Coffee too old
- Coffee too thick (decrease the grinder set)
- Chose a more creamy blend
The milk froth does not form
- Check that the flow of steam is suitable
-
Loud noise of the pump when dispensing
- Keep the STEAM button p
AUTO-DIAGNOSTICS
The electronic circuits manage and recognize various alarms and
operating anomalies.
These are indicated on the display panel.
- press without coffee
dispenser, some water comes out from the central part.
- or do a new descaling cycle.
Do not heat the milk excessively
ressed till it starts or press without
coffee dispenser
The machine does not go on PROGRAMMING mode
- To create mass by touching the handle of the machine and keep
press on/off button
Solution: it is a generic alarm; before calling the technical service,
please try to switch off and switch on the machine.
For any operating anomaly,
contact your nearest service center.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GKI 1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GKI 1110 in the language / languages: English as an attachment in your email.

The manual is 14,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info