574854
13
Zoom out
Zoom in
Previous page
1/18
Next page
11
AUTOMATIC SWITCH-ON
AUTOMATIC SWITCH-OFF
Press the key and the display panel shows:
Press the key and the display panel shows:
Use the keys to set the time you want the machine to switch
on automatically.
Your machine will be ready to dispense coffee at the time selected
without waiting for the heater to warm up.
Automatic switch-on can be activated or de-activated by pressing
the key (with the machine off).
The display will show an after the clock time indication when the
automatic switch-on function is activated.
Use the keys to set the time you want the machine to switch
off automatically.
AUTO ON
07:30
AUTO OFF
22:10
PROGRAMMING THE MACHINE
Use the keys to select the functions to be programmed
(these keys will allow you move up and down through the
programme menu), which are, in order of appearance:
Use the keys to set the hour. Initially the two digits related to
the hour flash.
After setting the hour, press the key
The two digits related to the minutes flash.
Set the minutes by pressing the keys
Pressing the key the display panel shows:
Various functions can be adjusted and programmed, as indicated
below: to enter programming mode, with the machine OFF press
the key for 3 seconds until the display panel shows:
PROGRAMMING
CLOCK
20:30
To set AM or PM press the key about 3 seconds.
The machine is ready to be used once the heating phase has
completed, however there are additional advanced programmes
which can be accessed if required.
5 OPERATION AND USE
DESCALING
The display shows the number of litres of water that have been
dispensed and the theoretical level of lime scale build-up
expressed as a percentage (100% indicates that you need to carry
out descaling).
This parameter is calculated based on the water hardness and the
number of litres of water dispensed. The lime scale indicator will
reset after a descaling cycle has been carried out.
DESCALING
20Lt 50%
WATER HARDNESS
Press the key and the display panel shows:
Use the keys to set the hardness of the water after using the
special measuring kit to establish the correct number
(0,5,10,15,20,25°dh) to be entered.
WATER HARDNESS
00° dh
DISPLAY LANGUAGE
Press the key and the display panel shows:
Use the keys to select your language.
DISPLAY
ENGLISH
POWER SAVING
Press the key and the display panel shows:
Use the keys to set the minutes (15,30,45,60,75,90 min)
after which the machine goes into “energy savings” mode.
In this phase, the temperature of the heater is lowered to reduce
consumption (at about 50°C).
Press the key to restore the machine to a ready status quickly.
POWER SAVING
15 min
AUTO SHUT DOWN
Press the key and the display panel shows:
Use the keys to set the minutes (15-30-45-60-75-90 min)
after which the machine switches off automatically. 0=OFF.
AUTO SHUT DOWN
15 min
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GKI 1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GKI 1110 in the language / languages: English as an attachment in your email.

The manual is 14,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info