ENGLISH
39
Audio settings for analogue audio output
Selecting the audio menu
1 Press »i« to open the main menu.
2 Select the » « menu item (Audio Settings) by pressing »4«
or »
3« and activate with »OK«.
– The »Audio Settings« menu appears.
Note:
The following sections offer more explanation on using the
equipment, from point
1.
Selecting the audio signal
Here you select whether the audio signal is played in stereo or
left/right channel.
1 Select »Analogue audio« with »P+« or »P–« and activate with
»
OK«.
2 Select »Downmix« by pressing »P+« or »P–« and activate by
pressing »
OK«.
3 Select the signal (»L/R« or »Stereo«) with »P+« or »P–« and
press »
OK« to confirm.
4 Press »i« to close the menu.
Switching the dynamic range (volume range) on
and off
Dolby Digital soundtracks have a very large dynamic volume
range, hence there is a great difference in volume between quiet
and loud tones. When played at high volume this can be a fasci-
nating experience, which may however cause disturbance late at
night.
Simply reducing the volume does not produce pleasing results, and
the dialogue becomes difficult to understand. You need to turn
down the louder sounds and turn up the quieter passages, while re-
taining the volume of the dialogue.
1 Select »Analogue audio« with »P+« or »P–« and activate with
»
OK«.
2 Select »D.R.C.« with »P+« or »P–« and activate by pressing
»
OK«.
3 Select the function by pressing »P+« or »P–« (»On«) and press
»
OK« to confirm.
The »Auto« setting adjusts automatically, depending on the
disc content.
4 Press »i« to close the menu.
AUDIO SETTINGS
________________________________
––Audio Settings ––
Analogue audio
Digital audio
Dolby Digital
Equalizer
3D surround
HDCD
1
––Analogue audio ––
Downmix Ste.
D.R.C. Auto
L/R
Stereo
1
––Analogue audio ––
Downmix Ste.
D.R.C. Auto
On
Off
1
Auto
