574852
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
OPERATION ________________________________
Connections
Ducted Version Air Exhaust
System
When installing the ducted version, connect
the hood to the chimney using either a flexible
or rigid pipe ø 150 or 120 mm, the choice of
which is left to the installer.
7
To install a ø 120 mm air exhaust connection,
insert the reducer flange 9 on the hood body
outlet.
7
Fix the pipe in position using sufficient pipe
clamps (not supplied).
7
Remove possible charcoal filters.
Recirculation Version Air
Outlet
7
Insert the connection extension pieces later-
ally 14.1 in connection 15.
7
Insert the Connector 15 into the Support
bracket 7.3 and fix it with a screw.
7
Make sure that the outlet of the extension
pieces 14.1 is horizontally and vertically
aligned with the chimney outlets.
7
Connect the air outlet connection 15 to the
hood body outlet using either a flexible or
rigid pipe ø 150 mm, the choice of which is
left to the installer.
7
Ensure that the activated charcoal filters have
been inserted.
Electrical Connection
7
Connect the hood to the mains through a two-
pole switch having a contact gap of at least
3 mm.
7
Remove the grease filters (see paragraph
Maintenance) being sure that the connector
of the feeding cable is correctly inserted in the
socket placed on the side of the fan.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GDK5792 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GDK5792 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info