574852
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
OPERATION ________________________________
Wall drilling and bracket
fixing
Draw the following on the Wall:
7
a Vertical line up to the ceiling or top surface,
at the centre of the area in which the Hood is
to be fitted;
7
a Horizontal line: 650 mm min. above the
Cooker Top.
7
Rest the Bracket 7.2.1 as indicated, 1-2 mm
from the ceiling or surface above the hood,
aligning its centre (grooves) with the vertical
reference line.
7
Mark the centres of the holes in the bracket.
7
Rest the Bracket 7.2.1 as indicated, X mm under
the first bracket (X = height of the Upper chim-
ney provided), aligning its centre (grooves)
with the vertical reference line.
7
Warning: The Bracket must be in a position that
allows a minimum distance of 50mm from the
upper part of the Motor unit, so if when meas-
ured the position of the Bracket is found to be
below the Motor unit, the bracket must be fitted
50 mm above this.
7
Mark the centres of the holes in the bracket.
7
As shown in the drawing, mark a reference
point 116 mm from the vertical reference line,
and 545 mm above the horizontal reference
line.
7
Repeat this operation on the other side.
7
Drill the points marked using a ø 8 mm drill bit.
7
Insert the plugs 11 into the holes.
7
Fix the brackets, using the screws 12a (4.2 x
44.4 ) provided.
7
Tighten the 2 screws 12a (4.2 x 44.4) pro-
vided in the hood canopy fixing bores, leav-
ing a gap of 5-6 mm between the wall and the
heads of the screws.
Mounting the hood body
7
Before attaching the hood body, tighten the
two screws Vr located on the hood body
mounting points.
7
Hook the hood body onto the screws 12a.
7
Fully tighten the support screws 12a.
7
Adjust the screws Vr to level the hood body.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GDK5792 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GDK5792 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info