574850
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
MAINTENANCE AND CLEANING _________________
7
Within 3 seconds press the “D” key to
activate/deactivate carbon filter saturation
alarm.
7
“C” symbol lit - carbon filter saturation
alarm ACTIVATED.
7
“C” symbol unlit - carbon filter saturation
alarm DEACTIVATED.
Replacing the carbon filter
Resetting the alarm signal:
7
Switch off the motor and the lighting system.
7
Press the “G” key for at least 2 seconds.
Replacing the filter:
7
Open the comfort panel.
7
Remove the metal grease filters.
7
Remove the carbon filter as indicated in the
picture.
7
Place the filter again into its seat.
7
Place again the metal grease filters into their
places.
Cleaning the hood
7
Hood must only be cleaned when it is
unplugged from mains outlet or when the
fuse is switched off!
7
Hood must not be cleaned with a vapor
cleaner as it not ensured that it would operate
safely afterwards due to water vapor.
Outer surfaces of the hood must be cleaned
with a mild cleaning agent (e.g. dish soap).
Do not use strong cleaning agents, abrasive
agents or sharp objects.
Stainless steel surfaces shall be cleaned with
a commercially available stainless steel clean-
ing agent and a soft, non-abrasive sponge or
cloth. In order to prevent scratches, wiping
action shall be performed on the direction of
surface structure while you are cleaning the
stainless steel surfaces.
Replacing the lamp
7
Remove the 2 screws fixing the lighting
support, and pull it out of from the hood.
7
Remove the lamp from the support.
7
Replace with another of the same type,
making sure that the two pins are properly
inserted in the lamp holder socket holes.
7
Install the support, fixing it in place with the
two screws removed in previous steps.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GDK5782 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GDK5782 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info