ENGLISH
4545
Selecting the Tape input source
1 Select the Tape input source with »RADIO/TAPE/CD« on the device
or »SOURCE« on the remote control.
– Display: »TAPE«.
2 Open the tape compartment with »
7
/
ə
« on the device.
3 Insert a tape in the compartment with the open side facing down and
the full reel on the left side (see »TAPE DIRECTION«).
4 Close the tape compartment by pressing the front side of the
tape compartment »CLOSE« carefully.
Tape playback
1 Press »
ı
« to start playback.
– Display: »TAPE«.
– Playback stops at the end of the side of the tape.
2 Press »II« to interrupt playback (pause).
Press »II« to resume playback.
3 End playback by pressing »
7
ə
«
4 To open the tape compartment, press »
7
ə
« again and take out the
cassette.
Fast forwarding and rewinding the tape
1 Press »
ľľ
« or »
ıı
« when the CD is in the STOP position.
– »
ľľ
« rewinds to the beginning of the tape, »
ıı
« fast forwards to
the end of the tape.
2 Press »
7
.« at the required position on the tape.
Tape recording
Erase protection
Every new recording overwrites the existing recording on the tape.
You can protect your own tapes against accidental erasure by breaking the
safety tabs on the top of the tape.
Pre-recorded commercial music tapes are already protected against
accidental erasure.
If you want to record on to a protected tape, cover the opening with
adhesive tape.
Note:
Only use NORMAL-type tapes (IEC I) for recording.
CHROME (IEC II) or METAL (IEC IV) tapes are not suitable. During the
recording, the volume must be set to at least level »1«. The setting of the
Ultra Bass System does not affect recording.
TAPE MODE
__________________________________________
