ENGLISH
45
Note
To make sure that the desired program will still be recorded in its entirety,
even if there is a change in the broadcasting time, when programming the
timer data you should always set the start time a bit earlier and the stop time
sufficientl
y later than the times indicated in the program guide.
6 Select the »Start time« row using the »
,,..
« buttons, then select »Day /
Month / Year / Hour / Minute« using the »
;; ::
« buttons, and finally
enter the corresponding value using the numeric buttons »1 … 0«.
Example:
Start: Saturday, 23. September 2000, 20:15 h.
Entry: 2 3 0 9 2 0 0 0 2 0 1 5
Note
Make sure the stop time is not earlier than the start time the same day.
7 Select the »Stop time« row using the »
,,..
« buttons, then select »Day /
Month / Year / Hour / Minute« using the »
;; ::
« buttons, and finally
enter the corresponding value using the numeric buttons »1 … 0«.
Example:
Stop: Saturday, 23. September 2000, 21:55 h.
Entry: 2 3 0 9 2 0 0 0 2 1 5 5
Please read also the following pages!
TIMER PROGRAMMING
___________________________________________________________
Timer
Set start time.
[0..9]-Edit, [TXT]-Previous
Local Time 23/09/2000 17:02
TVCH. Type
25CH. Number
MTVCH. Name
23/09/2000 20:15Start Time
23/09/2000 21:15Stop Time
NoStatus
Timer #1
Timer #2
Timer #3
Timer #4
Timer #5
Timer #6
Timer #7
Timer
Set stop time.
[0..9]-Edit, [TXT]-Previous
Local Time 23/09/2000 17:02
TVCH. Type
25CH. Number
MTVCH. Name
23/09/2000 20:15Start Time
23/09/2000 21:55Stop Time
NoStatus
Timer #1
Timer #2
Timer #3
Timer #4
Timer #5
Timer #6
Timer #7
