12
Setting the menu language
1 Press »MENU« to open the main menu.
2 Select the main menu item »Settings« with »VOL – a« or
»VOL + s« and press »OK« to confirm.
3 Select »Language Settings« with »CH + A« or »CH – S«
and press »OK« to confirm.
4 Select »Menu Language« with »CH + A« or »CH – S«.
5 Select the language with »VOL – a« or »VOL + s«.
6 Press »EXIT« three times to finish the setting.
Creating a station list
Automatic station search
The automatic station search creates a list of all the stations which
can currently be received.
1 Select the main menu item »Scan« with »VOL – a« or »VOL
+ s« and press »OK« to confirm.
2 Select »Antenna Power« with »CH + A« or »CH – S« and
press »VOL – a« or »VOL + s« to activate or deactivate the
setting.
– »On«: the antenna is not powered by itself.
– »Off«: the antenna is powered using a mains adapter of its
own, for example.
Caution!
Only activate the antenna voltage if the antenna is an active
indoor antenna with a signal amplifier with no power supply of
its own from a mains adapter or similar source. Otherwise you
may cause a short circuit and irreparably damage your anten-
na.
3 Select »Scan Mode« with »CH + A« or »CH – S« and
press »VOL – a« or »VOL + s« to select »Autom. search«.
4 Select »Start Scan« with »CH + A« or »CH – S« and press
»OK« to confirm.
– The search starts. At the end of the search, the digital receiver
switches to the first station in the list.
SETTINGS ______________________________________________
English as
Language Setting
Localtime/Timer
Video Output
English as
English as
Sort Channels
System Setting
Menu Language
Audio Language
Subtitle Language
Channels Favorites Settings Scan Timer
Off as
Auto Scan as
Scan Mode
Channel Number
Antenna Power
Start Scan
Channels Favorites Settings Scan Timer
Auto Scan as
Off as
Scan Mode
Channel Number
Antenna Power
Start Scan
Channels Favorites Settings Scan Timer
