26
Preparation
1 Switch on the radio recorder by moving the »RADIO TAPE/ OFF CD«
function switch to »TAPE«.
2 Press »■/
ə
« to open the tape compartment.
3 Insert a cassette in the compartment with the tape side facing upwards
and the full reel on the right (see »TAPE DIRECTION«).
4 Close the tape compartment by carefully pressing »CLOSE« on the
front of the compartment.
Cassette playback
1 Press »
ľ
« to start playback.
The »OPER.
•
« indicator lights up.
– Playback stops at the end of the side of the tape.
2 Press »II« to pause playback.
Press »II« to resume playback.
3 Press »■/
ə
« to end playback.
4 To open the tape compartment, press »■/
ə
« again and take out the
cassette.
Note:
The device is switched off when no button on the cassette unit is pressed.
Fast forward/rewinding the cassette
1 From the STOP position, press »
ľľ
« or »
ıı
«.
– »
ľľ
« fast forwards to the end of the tape, »
ıı
« rewinds to the
beginning of the tape.
2 Press »■/
ə
« when you reach the required position on the tape.
Tape recording
Erase protection
Every new recording overwrites the existing recording on the tape.
You can protect your own cassettes against accidental erasure by breaking
the safety tabs on the top of the cassette.
Pre-recorded commercial music cassettes are already protected against
accidental erasure.
If you want to record on to a protected cassette, cover the opening with
adhesive tape.
Note:
Only use NORMAL-type cassettes (IEC I) for recording.
CHROME (IEC II) or METAL (IEC IV) tapes are not suitable. The volume
setting and the position of the Ultra Bass System switch do not affect the
recording level.
TAPE MODE
__________________________________________
PROG.
OPER.
PROG.
OPER.
