ķ
14
Expert mode
6. Select the next setting
(repeat points 2 to 5)
7. Switching off EXPERT
Press the
¢¢
EXPERT-button for a longer time
until the signal tone can
be heard.
Possible settings 1…ß`
1
Activating coding (you can find detailed
directions in the chapter »Coding«,
page 16)
If »CODE« appears in the display, coding is
not activated.
If »SAFE« appears in the display, coding is
activated.
2 Contrast of the display
»DISPL 07« (00 ... 63), depending on
where the car radio is instal-
led, so that you can read the
display easily.
3 Security LED (On/Off)
»BLK ON« The security LED flashes when
the system and the ignition are
switched off.
»BLK OFF« The security LED does not
flash.
4 Signal tone (On/Off)
»BEEP ON« Signal tone as confirmation
that the system is function-
ing.
»BEEP OFF« Confirmation of functioning
by brief muting of the spea-
kers.
5 AM range (On/Off)
»AM ON« The AM range can be selected
with the
¢¢
RADIO button.
»AM OFF« AM is skipped when switching
through the ranges.
6 TP-IS (radio mode)
If you are in a reception area where you
receive RDS channels poorly, you can stop
the automatic station search in radio mode.
»TP-IS ON« Automatic traffic radio sta-
tion search desired.
»TP-IS OFF« No automatic traffic radio
station search desired.
ǺǺ For volumes less than »VOL 4«, the auto-
matic traffic radio station search is activa-
ted (»TP-IS ON«) for reasons of conve-
nience.
7 Automatic change of the regional channel
If an RDS channel consists of different
regional broadcasts, it can occur that your
car radio switches between different regio-
nal broadcasts because of the reception
area.
»REG ON« Automatic change of regional
broadcasts is possible.
»REG OFF« No change to a different
regional broadcast.
8 Switching on and off with the ignition
switch.
»IGN ON« You can switch the car radio on
and off with the ignition switch
of the vehicle.
»IGN OFF« Switching on and off only with
the
¡
IO
button.
9 Mute during phone mode
»PHONE ON« Muting is activated.
»PHONE ON« Muting is deactivated.
ǺǺ The telephone mute signal must be switch-
ed off in this case.