569692
89
Zoom out
Zoom in
Previous page
1/100
Next page
89
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------
DiSEqC 1.2 Settings
Adjust the satellite antenna position according to
each satellite. These settings can be stored and
the antenna can be moved to a preset position.
1 Select the line »DiSEqC 1.2 SETTINGS«
with »
V
« or »
Λ
« and press »OK« to con-
firm.
»DiSEqC 1.2 SETTINGS« menu is dis-
played.
2 Use »
V
« or »
Λ
« to select necessary items.
»Moving Mode«: Set the Moving Mode
with »
<
« or »
>
« to »Discrete« or »Continu-
ous«.
»Discrete«: Moves the antenna to
west or east for the determined step
size.
»Continuous«: Moves the antenna
to west or east continuously.
»Step Size«: With »
<
« or »
>
« select the
number of steps the antenna has to rotate.
»Step Size« is active when »Moving
Mode« is selected as »Discrete«.
»Move Motor«: Adjusts the antenna for
the selected satellite. Set the antenna to
»West« with »
<
« and to »East« with »
>
«.
»Limit Position«: Sets the limit position
which the antenna will be able to move
and allows the antenna to move within the
determined limits. With »
<
« specify a limit
position in »West« direction and with »
>
«
specify a limit position in »East« direction.
»Go To Stored Position«: Moves the
antenna to the preset satellite position.
Maximum 50 positions can be saved.
Select the setting with »

« (green) button,
select predefined position with »
<
« or
»
>
« and confirm with »

« (green) button.
Antenna will mode to saved position.
»Store Current Position«: Stores antenna's
current position. Select setting with »
«
(red) button, select recording position with
»
<
« or »
>
« and confirm with »

« (green)
button.
»Reset DiSEqC 1.2 Limit«: Resets the limit
positions set for the antenna.
3 Press »EXIT« to end the setting.
Searching for television chan-
nels from the cable provider
automatically
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press »OK« to confirm.
4 Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press »OK« to con-
firm.
5 Select the option »Cable« with »
<
« or »
>
«
and press »OK« to confirm.
»Automatic Channel Search« menu is
displayed.
Source Setup
Sound Settings Parental Guidance
Back
Scan Type Quick
Frequency AUTO
Network ID AUTO
Next Page
6 Select the line »Scan Type« with »
Λ
« or
»
V
« and select the option »Quick« or »Full«
scan type with »
<
« or »
>
«.
»Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
Network ID« performs the installation that
is suitable to your network. If you know
the Network ID, please enter it. If you do
not know the Network ID, please select
»Auto« for »Frequency« and »Network
ID«.
If scanning cannot be performed with
»Quick« option, select »Full«. All current
channels are tuned and stored in »Full«
scanning. This scanning process can take
a long time. This option is recommended
if your cable operator does not support
quick scanning function.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 48 VLX 8481 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 48 VLX 8481 BL in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 48 VLX 8481 BL

Grundig 48 VLX 8481 BL User Manual - German - 103 pages

Grundig 48 VLX 8481 BL User Manual - Dutch - 104 pages

Grundig 48 VLX 8481 BL User Manual - French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info