569692
87
Zoom out
Zoom in
Previous page
1/100
Next page
87
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------
Searching for digital television
channels from a satellite manu-
ally
If a certain channel cannot be found with au-
tomatic search, you can search it manually by
manual search function. You must enter all pa-
rameters of the channel correctly. You can ob-
tain the current transponder information from
teletext page, satellite TV magazines or internet.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press »OK« to confirm.
4 Select the line »Manual Channel Search«
with »
V
« or »
Λ
« and press »OK« to con-
firm.
5 Select the option »Satellite« with »
<
« or »
>
«
and press »OK« to confirm.
6 Select the required items with »
V
« or »
Λ
«.
»Service Type«: Press »
<
« or »
>
« to select
whether you want to search for only televi-
sion channels (DTV), only radio channels
(Radio) or both (Radio+TV).
»Scan Type«: Press »
<
« or »
>
« to select
whether you want to search for only free
digital television channels (Free), only
scrambled digital television channels
(Scrambled) or both (Free + Scrambled).
»Transponder«: Enter channel frequency
with »1...0« as a 5-digit number.
»Symbol Rate«: Enter channel symbol rate
with »1...0« as a 5-digit number.
»Polarization«: Select the channel polar-
ization with »
<
« or »
>
« as »Horizontal«
or »Vertical«.
»Network Search«: Select the network
search with »
<
«or »
>
« as »On« or »Off«.
7 Press »
« red button to start searching.
The »Digital Searching« menu appears,
and the scan for TV channels begins.
Note:
7
The search can be aborted with »EXIT«.
8 Press »EXIT« to end the setting.
LNB Settings
Notes:
7
The following description about the LNB set-
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
7
Your TV supports SCR system (Single Chan-
nel Router). If you are using SCR satellite
system, follow the steps described in »LNB
Type« section.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
»
>
« or »
<
« and press »OK« to confirm.
4 Select the line »Manual Channel Search«
with »
V
« or »
Λ
« and press »OK« to con-
firm.
5 Select the option »Satellite« with »
<
« or »
>
«
and press »OK« to confirm.
6 Activate the option »Antenna Settings« with
»

« (blue).
The »Antenna Settings« menu is dis-
played.
7 Select the required items with »
V
«, »
Λ
«.
»Satellite«: Press »OK« and use »
<
«, »
>
«,
»
V
« or »
Λ
« to pick the satellite you wish
to get the digital stations from and press
»OK« to confirm
»Transponder«: »Press »OK«, and use
»
<
«, »
>
«, »
V
« or »
Λ
« to select a tran-
sponder and press »OK« to confirm. Use
»
« (red) to add a transponder, use »

«
(green) to delete it, or use »

« (blue)
to change transponder data
»LNB Type«: Press »OK« and use »
<
«
or »
>
« to select the LNB type used in the
satellite system and press »

« (green) to
confirm. If you are using the SCR System,
please perform the »User Band«, »KB
Frequency« and »LNB Selection« settings.
»User Band«: Select the user band
number assigned to the user with »
<
«
or »
>
«.
»UB Frequency (MHz)«: Enter the
user band frequency assigned to the
user band with »1...0«.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 48 VLX 8481 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 48 VLX 8481 BL in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 48 VLX 8481 BL

Grundig 48 VLX 8481 BL User Manual - German - 103 pages

Grundig 48 VLX 8481 BL User Manual - Dutch - 104 pages

Grundig 48 VLX 8481 BL User Manual - French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info