789277

Grouw 17940 - S600 Manual

41
Zoom out
Zoom in
Previous page
1/55
Next page
41
GB
Changing the PIN code
1. Switch the robot lawnmower on as described above
so that the on/locked indicator light (j) lights up
green.
2. Press the LOCK/4 (e) and OK (f) buttons at the same
time. The on/locked indicator light ashes green and
red.
3. Enter a new 4-digit PIN code using the 1-4 buttons (b,
c, d, e) and then press the OK button. The on/locked
indicator light ashes green.
4. Enter the same PIN code again and press the OK
button. The on/locked indicator light lights up green.
The PIN code has now been changed.
5. Keep in mind that the PIN code is an eective anti-
theft measure! If you forget your PIN code, you
cannot unlock the control panel or use the robot
lawnmower!
If you forget your PIN code, you must visit www.schou.
com and follow the instructions on obtaining a new
PIN code. For this, you will need the robot lawnmower’s
serial number and the purchase receipt.
Updating the rmware
Note!
• Therobotlawnmowermustbepositionedwithinits
working area once the update is complete.
• Thermwareupdatemustbeperformedwithafully
charged battery.
• Donottouchthemainswitchduringthermware
update.
1. Download the rmware update from www.grouw.
dk or www.schou.com. You can also read the update
instructions there. Copy the rmware update onto an
empty USB stick (max. 4 GB, not supplied), which is
FAT32 formatted. Double-click on start.bat to extract
the rmware les.
2. Set the main switch (5) to the OFF position. Open the
battery cover (7) and remove the battery.
3. Insert the USB stick into the USB jack as illustrated.
4. Re-insert the battery and set the main switch (5)
to the ON position. Press the POWER (a) and OK
(f) buttons at the same time for 5 seconds. All the
indicator lights light up green.
5. Press the LOCK/4 button (e). The rmware update
starts. When all ve indicator lights for work time (i)
are lit, the update is complete.
The update typically takes 3-5 minutes. If the update
has not started after 1 minute, this is due to incorrect
use or because the USB stick is damaged. Try using a
dierent USB stick.
6. Remove the USB stick and replace the battery cover.
Rain sensor
The robot lawnmower is equipped with a rain sensor so
that it can detect when it rains. The robot lawnmower
is programmed at the factory to return to the charging
station when it is raining suciently to activate the
rain sensor. There it will fully charge and then wait until
the rain sensor is dry before automatically starting to
cut the grass. If this start time is outside of the robot
lawnmower’s daily work time, it will not start again until
the following working day.
Note!
Do not short-circuit the rain sensor!
Note!
The robot lawnmower must return to the charging
station and the charging station must be disconnected
from the mains during a thunderstorm. Damage caused
by lightning strike is not covered by the guarantee.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grouw 17940 - S600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17940 - S600 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 18.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info