505561
10
Zoom out
Zoom in
Previous page
1/37
Next page
5
Controls and functions – GZTA 1.1200DX
6
Control and functions
1 Speaker terminals For connection of the subwoofer
2
Power terminals
GND -> Ground connection
REM -> Remote antenna terminal
BATT -> +12 Volt
3 Satus indication
GREEN
OK
RED – Error
4 Cinch inputs
Terminal for connection of the RCA wires.
To avoid failure, please use high quality RCA wires.
5 Input level controlle
r
With this controller you can adjust the input sensitivity.
6 Bass boost controlle
r
For adjusting of the bass boost level in the range from 0 to +12 dB.
7 Low pass controller
A
djust the variable lowpass frequency to the desired frequency
between 30 and 250 Hz using the controller.
8 Master / Slave Switch For choosing the operation mode of each amplifier in link mode.
9 Cinch Outputs For connection of additional amplifiers in fullrange operation.
10 Remote control input For connection of the bass remote control.
11 Phase shift controller
This controller allows you to fit the subwoofer channel in-phase to the
front system.
12 Subsonic controller
This controller allows you to filter low frequencies in a range between
10 and 50 Hz. This function reduces the mechanical Xmax and raises
the capacity of the connected subwoofer.
13
Master/Slave
Cinch-In-/Output
Cinch In- / Output for operation of two same amplifiers (2x GZTA
1.800DX or 2x GZTA 1.1200DX) in linkmode.
Turning on the amplifier
The amplifier automatically turns on a few seconds after you turn on your radio.
Note: Your amplifier temporarily shuts down if it gets too hot, then restarts automatically once it cools
(At about 80° / 176° F).
Adjusting the audio level
1. LEVEL (Min/Max): Turn fully counter- clockwise to MIN position
2. Turn the auto sound system's volume control to about two-third of its full range.
3. Adjust LEVEL to a comfortable listening level.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ground zero GZTA 1.800DX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZTA 1.800DX in the language / languages: German as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info