505561
36
Zoom out
Zoom in
Previous page
1/37
Next page
13
Specifications
Modelo GZTA 1.800DX GZTA 1.1200DX
Tipo
1 Channel Class D 1 Channel Class D
RMS Power @ 4
CEA Standard CEA-2006-A
1 x 350 W (1% THD+N)
1 x 450 W (10% THD+N)
1 x 500 W (1% THD+N)
1 x 700 W (10% THD+N)
RMS Power @ 2
CEA Standard CEA-2006-A
1 x 550 W (1% THD+N)
1 x 750 W (10% THD+N)
1 x 900 W (1% THD+N)
1 x 1250 W (10% THD+N)
RMS Power @ 1
CEA Standard CEA-2006-A
1 x 850 W (1% THD+N)
1 x 1000 W (10% THD+N)
1 x 1400 W (1% THD+N)
1 x 1750 W (10% THD+N)
RMS Power @ 2 Linkmode
CEA Standard CEA-2006-A
1 x 1700 W (1% THD+N)
1 x 2000 W (10% THD+N)
1 x 2800 W (1% THD+N)
1 x 3500 W (10% THD+N)
Damping factor
> 100
Signal to noise Ratio
> 70 dB
Lowpass
30 Hz – 250 Hz
Subsonic filter
10 Hz – 50 Hz
Bass boost
0 ~ +12 dB (45 Hz)
Repuesta de frecuencia
10 Hz – 250 Hz (± 1 dB)
Input sensitivity
200 mV – 9 V (± 5%)
THD
< 0,2 %
Control remoto Bass
9 9
Fusible
3 x 30A 4 x 35A
Dimensiones
W x H x L mm
302 x 49 x 230 382 x 49 x 230
Dimensiones
W x H x L inch
11.89“ x 1.93“ x 9.06“ 38.2“ x 1.93“ x 9.06“
14
Guía de problemas
Síntomas Puntos de Chequeo Solución
No hay sonido
Esta el POWER LED iluminado?
Revise los fusibles en el
amplificador.
Revise si el control remoto esté
conectado.
Compruebe conductores de la
señal.
Compruebe de nuevo el control.
Compruebe sintonizador / nivel de
volumen de la cubierta.
Esta el diagnostic LED iluminado?
Revise si el altavoz esta en corto o
si el amplificador esta
sobrecalentado
El amplificador no enciende
El amplificador no tiene corriente
Revise la conexiones de los
altavoz
No tiene corriente el cable remoto
con el recibidor encendido
Revise la conexión del Radio
No hay sonido en uno de los
canales
Revise la conexión del altavoz
Inspeccione si hay un cortocircuito
o una conexión abierta
Revise la conexión de Audio
Reverso entradas izquierda y
derecha RCA para determinar si se
está produciendo para que el
amplificador
El amplificado se apaga a
medio volumen / alto volumen
Revise la carga de Impedancia de
los Altavoces
Asegúrese deobservar las
recomendaciones impedancia del
altavoz.
(Si utiliza un medidor de ohmios
para comprobar la resistencia del
altavoz, por favor recuerde que la
resistencia DC y la impedancia de
AC puede no ser la misma.)
El Protección LED esta
encendido
Apagado por temperatura Baje el nivel de la unidad de Radio
Corto en Cableado de Altavoces
Separar y aislar los cables de
altavoces
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ground zero GZTA 1.800DX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZTA 1.800DX in the language / languages: German as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info