505522
15
Zoom out
Zoom in
Previous page
1/31
Next page
8
GROUND ZERO
Setting
Long press SEL button to enter into main settings menu, Rotate Vol knob on front panel or press Vol+/-
buttons on remote control to choose the volume level 0-45.
Press SEL button repeatedly to choose between sub-settings: Rotate Vol knob on front panel or press
Vol+/- buttons on remote control to adjust the settings.
AF => IN VOL. => ADJ CLOCK => 24/12hour =>TA VOL => EON => PTY => REG => TEL
VOL => LOC (In radio mode only) => MONO (In radio mode only) => LOUD => SUBW =>
BEEP => DSP => EXIT
AF Set AF (Alternative Frequency) on/off.
IN VOL Adjust the initial volume level 0-45.
ADJ
Rotate the Vol knob clockwise or press VOL+ button on remote control to
adjust minute and rotate the Vol knob anti-clockwise or press
VOL- button on remote control to adjust hour.
24 / 12 hour Turn the knob to choose 24 or 12 hour
TA VOL Turn the knob to adjust TA volume.
EON Turn the knob to adjust EON ON/OFF.
PTY Set (Program Type) on /off.
REG
Choose REG on/off. When REG is enabled (on), the receiver accepts regional
variants of the tuned station with REG icon turned on. When REG is disabled
(off), the receiver ignores regional variants.
TEL VOL Turn the knob to adjust TEL volume.
LOC
Adjust LOC ON/OFF, when LOC is enabled, the receiver accepts regional
variants.
MONO Turn the knob to choose MONO ON/OFF.
LOUD
Set Loudness ON/OFF. Default settin
g
is OFF. The “LOUD” function makes it
possible to emphasize low and high frequencies through the push of a
button in order to increase sound perception in an adjustment to the
respective volume.
SUBW
Set SUBW ON/OFF. This function allows you to turn the RCA subwoofer
output ON and OFF.
BEEP
Set BEEP ON/OFF. When BEEP is on, press any key will make a beep sound.
Default setting is OFF.
DSP Choose between POP => ROCK => CLASS => FLAT => NONE.
Mode Setting
Press MODE button TUNER => (* CD) => (* SD) => (*USB) => AUX => TUNER
(* available only if there is media device in disc, SD, USB slot)
Display
Press DIS button on remote control to see current tuning information and time.
In Radio mode, display menu:
Clock (clock time) => PTY => PS (program station) => Frequency => EXIT
9
GROUND ZERO
AUX jack
Intended to receive audio signals by connecting to external media player.
Digital Tuner Operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
RDS overview
Band selection
Press MODE button to select TUNER. Press BAND to select:
FM1 => FM2 => FM3 => AM1 => AM2.
When a new frequency band is selected, the last chosen frequency / station of that frequency band will
be heard.
Manual / automatic tuning
Manual tuning: To find a station, select a band first, then press and hold T-DN/T-UP buttons on remote
control until MANUAL appears on the display, then press these buttons repeatedly to search a station
upward or downward.
Automatic tuning: To find a station, select a band first, then press and hold T-DN/T-UP buttons on front
panel or short press T-UP/DN buttons on remote control, the automatic downward/upward search will
start. It will play when a station is found.
PI Program Identification code Code for identifying programs
PS Program services name
Broadcast station name data expressed in
alphanumerically characters.
AF Alternative Frequency
Frequency list of broadcasting stations transmitting
the same program.
TP Traffic program identification
Identification data for traffic information
broadcasting station.
TA Traffic announcement identification
Identification data showing traffic information is
being transmitted or not.
EON
Enhanced other networks
information
The “EON” function is an additional RDS service. If
the current program doesn’t offer any traffic
announcements, EON automatically switches to the
traffic announcements on another program. After
the end of the announcement, the device switches
back to the previously heard station. The readiness
for traffic announcements “TA” has to be activated
for this. To turn the EON function on or off, please
switch to the RDS menu.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ground zero GZCR 335BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZCR 335BT in the language / languages: German as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info