Manual Ground zero GZCR 235USB (page 15 of 27) (German)

505521

Zoom out

Zoom in

1/27

GROUND ZERO

Programming preset stations

You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or

automatically.

To store a station:

- Select a band (if needed)

- Search a station by manual/automatic tuning

- Hold a Preset button (1-6) on remote control, where you want to store the station for at least

2 seconds. Or on front panel you can press OK button first and rotate VOL knob to choose (1-

6), and finally press OK button to confirm.

To recall a station:

- Select a band (if needed)

- Press a Preset button (1-6) on remote control to recall the stored station., or on front panel,

you can press T-UP/DN buttons to recall the stored station

Auto memory store

Select a band, press MEM button on front panel or AS/PS button on Remote control and hold for 2

seconds to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories

of the current band. To stop auto store, press this button again.

Note: During auto station preset, the unit will search and store stations with the strong signal first, and

then weaker signal stations until the memories are full.

Preset scan

Select a band, press MEM button on front panel or AS/PS button on Remote control to scan all preset

stations in the memories of the current band, each preset scan for 5 seconds. To stop preset scan, press

the button again.

AF (Alternative Frequencies) function

Press AF/REG button on remote control to turn on or turn off the AF function. You can also press and

hold SEL button and press it repeatedly to see AF, then rotate VOL knob on front panel or press V-/+

button on remote control to set this function on/off. If the AF function is on the display will show “AF”.

When AF switching mode is selected, but RDS information is not received yet the “AF” will be flashing.

The RDS program will be automatically searched and received. After turning on, if the RDS signal is weak

or even no signal, the unit will search another frequency with this RDS program.

REG (Regional) function

Press and hold AF/REG button on remote control for 2 seconds to enable or disable REG mode. You can

also press and hold SEL button and press it repeatedly to see REG, then rotate VOL knob on front panel

or press V-/+ button on remote control to set this function on/off. (Default is off for REG).

When REG is enabled (on), the receiver accepts regional variants of the tuned station with REG icon

turned on.

When REG is disabled (off), the receiver ignores regional variants.

TA (Travel Announcement) / TP (Travel Program Identification)

1) Enable or disable TA mode by pressing and hold BAND button on front panel or pressing TA/TP

button on remote control: (Default is OFF)

2) When TA function is activated, it will search the station with TA information automatically. If there is

no TA information, it will search the station with TP information automatically, if there is no TP

information either, it will return to the previous station after searching.

3) When receiving the station with TP information but without TA information, TP icon is on and TA

icon keeps blinking; when receiving the station with TP and TA information, both TP and TA icons

are on.

GROUND ZERO

4) When playing in other mode and TA information is received, it will change to the radio mode

automatically. After playing over, it will return to the previous mode. Press TA button once to ignore

the received TA information, press TA button twice to turn off the function.

PTY (Program Type)

Press and hold OK button on front panel or press PTY button on remote control to open PTY program

type list, and turn the VOL knob on front panel or press VOL+/- buttons on remote control to select a

PTY type. After selecting the program type you want, press OK button on front panel or press PTY

button on remote control to search. Press them again to stop the PTY search. If PTY code is different or

not available, LCD blinks with “PTY NONE”.

CD / USB/ SD Card Operations

Loading/Ejecting a disc

Turn the power on. And insert the disc to disc slot with the printed side facing up. Press EJECT button to

eject the disc. Inserting the SD card/USB device Insert the SD card or USB device into SD slot or USB

socket. Then the playing mode will be changed into SD or USB mode automatically.

Note!

When SD card and USB device are both inserted, the playing mode will be changed into the mode of the

device inserted later.

Playing/pausing

The unit will automatically play from the first sound track recorded on a disc/SD /USB device. To ensure

good system performance, wait until the unit finishes reading the disc /device information before

proceeding. Press 1/PAUSE button on remote control to pause playback, press it again to resume

playback.

Playing the previous/next track

During playback press PREVIOUS button to play the previous track. Press NEXT button to play the next

track.

Scanning forward and backward

Press and hold Fast forward/backward buttons to select fast forward/backward playing. Note: When fast

backward/forward playback reaches the previous or next track, the unit will resume normal playback.

- / + 10 files

Press 5/ 10-, 6/ 10 + buttons on remote control to jump to previous/next 10 files.

Repeat playback

Press 2/REPEAT on remote control or press BAND button on the panel repeatedly to choose repeat Play,

then press OK to confirm to play track repeatedly, press again to cancel.

Note!

After finishing playing all tracks or all folders of CD/MP3/SD, the unit restarts playing all tracks or all

folders automatically.

Intro

Press 3/INT button on remote control or press BAND on the panel to choose INT Play, then press OK to

confirm to activate INTRO function which will play the beginning of every track for 10 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZCR 235USB in the language / languages: German as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ground zero GZCR 235USB Manual

Product: