759335
26
Zoom out
Zoom in
Previous page
1/120
Next page
Maintenance and cleaning
CAUTION!
Risk of damage!
Always disconnect the power supply and
interrupt the CO2 supply before carrying out
maintenance work on the system. The plug-in
connector can then be disconnected.
Cleaning the cooler/carbonator
For hygienic and health reasons, the cooler/
carbonator must be cleaned once a year. Cleaning
must be performed before changing the filter
cartridge, in order to prevent contamination of the
replacement filter cartridge.
Note: The cleaning kit (Prod. no.: 40 434 001) and
the accompanying adapter (Prod. no.: 40 694 000) can
be ordered at www.shop.grohe.com.
Service
Fault Cause Remedial action
Water not flowing Filter not installed correctly
Hoses kinked
Water supply interrupted
- Insert filter straight
(11/2 - 2 turns).
- Check hoses for kinks.
- Open shut-off valves fully.
E1 in the display, no filtered
water, Blue® handle flashes red
Safety shut-off of pump - Disconnect voltage supply, *
Disconnect the power supply, wait 30 seconds and
re-connect.
- Insert filter straight
(11/2 - 2 turns).
- Check hoses for kinks.
- Open shut-off valves fully.
E3 in the display, no filtered water No connection between fitting and
cooler/carbonator
Cable or connector faulty
- Connect plug-in connector. *
- Contact Grohe Service.
E5 in the display, no filtered water,
Blue® handle flashes red
Fault function of cooler/carbonator - Disconnect voltage supply, *
Disconnect the power supply, wait 30 seconds and re-
connect.
E7 in the display, no filtered water,
Blue® handle flashes red
Humidity detected inside the cooler - Disconnect voltage supply, *
wait 15 minutes and re-connect.
• If condensation, the cooler is ready for operation after
that.
• If leakage occurs, the error message occurs again and
the GROHE Service must be contacted.
E8 in the display, Blue® handle
flashes orange
Filter capacity exceeded - Change filter cartridge immediately, see page 11.
E9 flashes alternately with HI in the
display
Cooler/carbonator overheated - Close Blue® handle, ensure ventilation and reduce
ambient temperature to max. 32 °C.
- Let cool down the cooler for least 10 -15 min.
- Reset error message E9, see below.
EC in the display, Blue® handle
flashes white
•CO
2 bottle almost empty or not in
place
- Replace CO2 bottle or put back in place, see page 12.
No carbon dioxide in positions
Medium and Sparkling
•CO
2 cylinder empty - Replace CO2 bottle, see page 12.
*If the faults E1 to E7 occur three times or more, please contact GROHE customer service.
25
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grohe 31326 Blue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grohe 31326 Blue in the language / languages: All languages as an attachment in your email.

The manual is 8,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info