505400

Grizzly EKS 2200 QT Manual

143
Zoom out
Zoom in
Previous page
1/200
Next page
143
UK
handle. Holding the chain saw with a
reversed hand conguration increases
the risk of personal injury and should
never be done.
c) Wear safety glasses and hear-

equipment for head, hands, legs
and feet is recommended. Adequate
protective clothing will reduce person-
al injury by ying debris or accidentaI
contact with the saw chain.
d) 
tree. Operation of a chain saw white
up in a tree may result in personal in
jury.
e) 


surface. Slippery or unstable surfaces
such as ladders may cause a loss of
balance or control of the chain saw.
f) When cutting a Iimb that is under
tension be alert for spring back.
When the tension in the wood bres is
released the spring loaded Iimb may
strike the operator and/or throw the
chain saw out of control.
g) 
brush and saplings. The slender
material may catch the saw chain and
be whipped toward you or pull you off
balance.
h) 


transporting or storing the chain

Proper handling of the chain saw will
reduce the Iikelihood of accidentaI
contact with the moving saw chain.
i) 
chain tensioning and changing ac-
cessories.
Improperly tensioned or lubricated
chain may either break or increase the
chance for kickback.
k) Keep handles dry, clean, and free
from oil and grease. Greasy, oily
handles are slippery causing loss of
control..
l) 


cutting plastic, masonry or non-
 Use of the
chain saw for operations different than
intended could result in a hazardous
situation.
m) -



cable to the equipment. Contact
between the saw chain and a live wire
can make metal parts of the equip-
ment live and cause an electric shock.
7) CAUSES AND OPERATOR PRE-
VENTION OF KICKBACK
Beware of kickback! Be careful of
kickback of the machine during
work. There is danger of injury
here. You can avoid kickbacks by
exercising caution and using a cor-
rect sawing technique.
Kickback may occur when the nose or tip of
the guide bar touches an object, or when the
wood closes in and pinches the saw chain
in the cut.
Tip contact in some cases may cause a sud-
den reverse reaction, kicking the guide bar
up and back towards the operator
Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly
back towards the operator.
Either of these reactions may cause you to
lose control of the saw which could result in
serious personal injury. Do not rely exclu-
… 143 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly EKS 2200 QT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EKS 2200 QT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info