505393
153
Zoom out
Zoom in
Previous page
1/200
Next page
153
UK
Turn the saw around and sharpen the
teeth of the other side.
6. The chain is worn and must be re-
placed by a new saw chain if only
approx. 4 mm of the cutting teeth is
remaining.
7. After the sharpening, all cutting ele-
ments must now be equal in length
and width.
8. After every third sharpening, the
sharpness depth (depth limitation)
must be checked and the height led
with the aid of a at le. The depth limita-
tion should be set back about 0.65 mm
from the cutting tooth. After the setting
back of depth limitation, round it off a
little at the front.
Adjusting the chain tension
The adjustment of the chain tension is de-
scribed in the chapter: Starting operation,
tensioning chainsaw.
Switch off the saw and pull out the
power plug.
Check the chain tension regularly and
adjust as often as possible. When pulling
on the saw chain with 9 N (approx. 1 kg)
tensile force, the saw chain and blade
must have a gap of no more than 2 mm.
Starting up a new saw chain
In the case of a new chain, the tensioning
force decreases after some time. There-
fore you must re-tension the chain after
the rst 5 cuts and at longer intervals after
this.

-

could spring back or break, poten-

Maintaining the chain bar

handling the chain or the chain bar.
The blade must be inverted every 8-10 work-
ing hours in order to guarantee even wear
(see chapter “initial operation”).
1. Switch off the saw and pull out the
power plug.
2. Remove the sprocket chain wheel
covering, the saw chain and the chain
bar.
3. Check the chain bar for wear. Remove
burrs and straighten the guide sur-
faces with a at le.
4. Clean the oil passages of the
chain bar (24), in order to guar-
antee a trouble-free, automatic
oiling of the saw chain during
operation.
5. Mount chain bar, chainsaw and
sprocket chain wheel covering and
tighten the chainsaw.
With the oil nozzles in good condi-
tion and the oil regulator set cor-
rectly, the saw chain will spray a
little oil off after starting.
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly EKS 1835 QT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EKS 1835 QT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info