Manual Grizzly EGT 1345 (page 87 of 128) (German, Dutch, French, Italian, Polish, Portuguese)

505473

Zoom out

Zoom in

1/128

your feet.

The tines may cause an accident.

Be careful while moving back-

wards – danger of tripping!

Do not touch the gearbox ( Nr.

21)

- as it may become hot during

operation – danger of burns!

To avoid damage to the tool:

• Neverliftordragthetoolwiththe

motor running.

 •

Lift the tool while moving it over

hard surfaces such as tiles or steps

 •

Adjust the depth setting such that

the equipment is not overloaded.

To avoid injuries and damage:

Switch the tool off after working with

it and for transport; disconnect from

the mains and wait for the tines to

stop moving.

 • Walkthetoolthroughthesoil

at normal pace and in a line as

straight as possible.

 • Alwaysworkawayfromthe

mainssocket.Makesurethat

the cable is kept well away from

the working area.

•

Always run the extension cable be-

hind you and, after turning, move it

to the side already worked.

 • Overload protection: The mo-

tor will cut out immediately if

overloaded. The tool cannot

be used until it has completely

cooled down again.

Cleaning, maintenance,

storage

Warning! Always return the tool

to the service centre for work not

described in the manual. Only use

original parts.

Switch the tool off, unplug it from the

mains, and wait for the tines to stop

moving before carrying out any main-

tenance or cleaning work on the tool.

Perform regular maintenance and clean-

ing on the tool. This will ensure long, reli-

able service.

General cleaning and mainte-

nance work

 •

Do not spray the tool down with

water (especially not under pres-

sure), and do not clean it under

running water.

There is a risk of

electric shock and the equip-

ment could be damaged.

 • Beforeeachuse,checkthe

equipment for obvious defects

such as lose, worn or damaged

parts. Check that all nuts, bolts

andscrewsaresittingrmly.

 • Checkcoversandsafetyde-

vices for damage and check

that they are sitting correctly.

Replace them if necessary.

Wear protective gloves when

carrying out maintenance and

cleaning work on the tool to

avoid injury from cuts.

Always clean the tool thoroughly after

each use. Always keep the tool clean.

Do not use cleaning uids or solvents.

•

Remove any soil and dirt residues stuck

to the tines, driveshaft, tool surface and

vents with a brush or dry cloth.

• Sprayorrubbiodegradableoilintothe

tines.

• Cleansoiledgripswithadampcloth

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EGT 1345 in the language / languages: German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly EGT 1345 Manual

Product: