Manual Grizzly EGT 1345 (page 86 of 128) (German, Dutch, French, Italian, Polish, Portuguese)

505473

Zoom out

Zoom in

1/128

in the same way with the carri-

age bolts, hand wheel nuts and

sheet metal rings.

5. Fix the mains cable with the ca-

ble clamps (15).

Reassembling the Wheels

In order to be able to work safely, the wheels

must be reassembled. The position required

for packaging is not suitable for working.

1. Pull the safety clip (18) and re-

move the retaining pin (19).

2 Take off the wheels (10). Rotate

them 180° and now attach the

wheels (10) onto the frame.

3. Fix the wheels (10) by inserting

the retaining pin (19) and app-

lying the safety clip (18).

The wheels are now adequately spaced to

be able to work safely.

Operation

Observe noise-abatement laws and

local by-laws.

Switching on and off

Note: Before switching the tool

on, make sure that the tool is not

touching any other objects and

hold it rmly in both hands.

Plug the tool into the extension cable.

For cable strain relief, form a loop

in the end of the extension cable

and hang it into the cable relief (6).

3. Connect the equipment to the

mains power supply.

4. To switch on, press the release

button (3) on the handle then the

starting lever (4). Release the

release button (3).

The cutting blades start to ro-

tate and dig into the ground.

5. To switch off, release the starting

lever (4).

Warning! The tines will continue

to turn for a few seconds after

the tool has been switched off.

Do not touch the rotating tines –

injury hazard!

Depth Adjustment

Adjust the desired working depth by chan-

ging the position of the wheels. The equip-

ment has 7 positions for depth adjustment.

1. Pull the safety clip (18) and re-

move the retaining pin (19).

2. Set the desired depth adjust-

ment by repositioning the con-

necting piece (20).

3. Fix the wheels (10) by inserting

the retaining pin (19) and app-

lying the safety clip (18).

Cutting Blade

The garden hoe can be operated with

a choice of four or six cutting blades.

Operating with four cutting blades means

greater force. Operating with six cutting

blades means a greater working width.

The two outer cutting blades can be de-

tached: see next page on Replacing the

Cutting Blades.

 • Removeonlytheouterscrews

at this point.

 • Thetwooutercuttingblades

can be removed.

Operating instructions

Always keep a rm grip on the

tool with booth hands and watch

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EGT 1345 in the language / languages: German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly EGT 1345 Manual

Product: