Manual Grizzly AHS 1845 T Lion (page 32 of 145) (English, German, Dutch, French, Polish, Spanish)

626729

Zoom out

Zoom in

1/145

Always hold the equipment rmly

in both hands, with one hand on the

rear handle and the other on the front

handle. Thumbs and ngers must be

rmly around the handles.

Observe the specied working an-

gle (60°±10°), in order to guarantee

safe working.

• Switch off the equipment immedi-

ately in the event that the blades are

blocked by solid objects, pull out the

power plug then remove the object.

• Always work away from the mains pow-

er outlet. Set the cutting direction before

starting work. Ensure that the power

cable is kept well away from the work-

ing area. Never lay the cable over the

hedge, where it could easily be caught

up in the trimmer blades.

• Do not use the unit if the blades are

blunt or worn. This will overstress the

motor and gearbox of the machine.

• Avoid overstraining the equipment dur-

ing work.

• Change position regularly while operat-

ing the device. Prolonged use of the

device can lead to blood circulation

disorders in the hands caused by vi-

bration. You can however extend your

machine use time by wearing appropri-

ate safety gloves or by taking regular

breaks. Please note that a personal

disposition to poor blood circulation,

low outside temperatures, or strong

grip forces while working may reduce

your work capabilities.

Cutting Techniques

• Cut thick branches beforehand using a

branch clippers.

• The double-sided cutter bar enables

cutting in both directions or, with a

swinging action, from one side to the

other.

• In case of vertical cutting, move the

hedge trimmer uniformly forward or up

and down in an arc movement.

• In case of horizontal cutting, move the

hedge trimmer in a sickle-shaped move-

ment to the edge of the hedge, so that

cut branches fall to the ground.

• In order to achieve long straight lines,

the placing of tensioned guiding cords

is recommended.

Cutting Shaped Hedges:

It is recommended that hedges be

cut in a trapezoidal shape, in order

to prevent stripping off of the lower

branches. This corresponds to the

natural plant growth and allows the

hedge to thrive optimally. During cut-

ting, only the new annual growths

are reduced and thus a dense

branching and a good screen will

develop.

1. Cut the sides of a hedge rst. To do this,

move the hedge trimmer in the direction

of growth from bottom to top. If you cut

down from the top, the thinner branches

will move out, which may result in some

areas having sparse growth or holes.

2. Cut the top edge, according to taste, in a

at shape, roof shape or rounded shape

3. Trim young plants to the required shape.

The main growth should remain undam-

aged until the hedge has reached the

planned height. All other shoots are

lopped off to half size.

Care of Free-Growing Hedges:

Free-growing hedges are not shaped when

cut, although they must be regularly main-

tained so the hedge does not become too

high.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AHS 1845 T Lion in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 6,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly AHS 1845 T Lion Manual

Product: