626729
30
Zoom out
Zoom in
Previous page
1/145
Next page
30
GB
Checking the charge status of
the rechargeable battery
The state of charge display (12b) signalis-
es the state of charge of the battery (12).
1. Press the button (12c) on the
battery (12).
The state of charge of the bat-
tery is displayed by illuminating
the appropriate LED lights of the
state of charge display (12b).
2. Charge the battery if the last
LED light of state of charge dis-
play (12b) changes from green
to red.
Charging the battery
Allow a freshly charged battery (11)
to cool down for approx. 15 min-
utes before inserting it into the bat-
tery charger (22).
LED lights:
The LED lights of the state of charge
display (
12b) of the battery (12)
ashes red if you have inserted a hot
battery into the battery charger (18).
1. If necessary, remove the battery
(12) from the device.
2. Slide the rechargeable battery
(12) onto the charger (18). It
locks into place audibly.
3. Plug the charger (18) into an
electrical outlet.
4. After the charging process, dis-
connect the charger (18) from
the mains supply.
5. Press the release keys (12a) on
the battery (12) and pull the bat-
tery out of the charger (18).
Used batteries
If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to
be replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see “Waste Disposal and
Environmental Protection”).
Assembling instructions
Pull out the power plug before car-
rying out any work on the equip-
ment.
If the equipment pipes are not
plugged together and screwed
correctly then the equipment
cannot be switched on.
Operation is prevented by a
safety switch!
Use only original parts.
Assembling the Equipment
1. Interlock the end of the hex-
agonal aluminium pipe of the
telescopic arm (7) and the end of
the arm below the cutting head
(2) up to the stop. Whilst inter-
locking the two, ensure that the
nose (7a) of the hexagonal alu-
minium pipe ts into the nut (2a)
at the end of the arm (see small
image).
2. Fasten both parts using the
screw sleeve (6)
.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly AHS 1845 T Lion at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AHS 1845 T Lion in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info