626727
128
Zoom out
Zoom in
Previous page
1/156
Next page
GB
128
with the supplied blade mounting
key (27):
The marking both on the blade
drive and the label side of the
cutting head (2) must match
(31).
3. Put on the grass shear blade
(25). The non-moving shear
plate (34) should be facing out.
The recesses (35) on the blades
are tting on the pins (36) in the
housing of the device.
4. Put on the blade cover (12) and
slide it towards the blade until it
snaps into place.
Insert hedge trimmer blade
1. Place the movable knife plate
(37) of the shrub shear blade
(23):
There are two markers. One on
the blade plate and the other
on the non-moving shear plate
(38). These have to match.
2. Before inserting the shrub shear
blade place the knife drive (30)
with the supplied blade mounting
key (27):
The marking on the blade drive
must point towards the lower pin
(36).
3. Put on the shrub shear blade
(23). The non-moving shear
plate (38) should be facing out.
The recesses (39) on the blades
are tting on the pins (36) in the
housing of the device.
4. Put on the blade cover (12) and
slide it towards the blade until it
snaps into place.
Cleaning/Maintenance
Leave any work not covered in
this manual to our Service Cen-
tre. Only use original parts.
There is a risk of injury!
Ensure that the safety key ( 6)
is removed before all tasks.
Wear gloves when handling the
blades! There is a risk of injury
from cuts!
Never use cleaning agents or sol-
vents, which can cause irreparable
damage to the unit. Chemicals can
attack the plastic components on
the unit.
Clean and service the unit regularly as fol-
lows. This guarantees a long life for your
unit:
Check the covers and guards for dam-
age and correct position. If necessary,
replace.
Keep the ventilation slits, motor hous-
ing and handles on the equipment
clean. To do this, use a damp cloth or
brush.
Always keep the blade clean.
After using the equipment, it is im-
perative to:
- Clean the blade
(with an oily cloth);
- Oil the blade shaft
with an oil can or
spray.
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly AGS 720-2 Lion-Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AGS 720-2 Lion-Set in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info