819235

Grillmeister GRG33A1 - IAN 437783 Manual

19
Zoom out
Zoom in
Previous page
1/134
Next page
GRG 33 A1
English - 17
6. Mounting
Remove the grill and all accessories from the packaging and check that the package contents are complete.
Remove any protective films. Keep the packaging material away from children and dispose of
appropriately.
The following tools are required to assemble the grill:
• Phillips screwdriver
• 7 mm open-ended spanner or combination pliers
Assembling the grill involves just 4 steps. There are illustrations on pages 2 and 3.
6.1 Assembly step 1: Mounting the wind guard (3)
You will need 3 short screws (7) and 3 nuts (9).
As shown in the diagram, insert the 2 parts of the wind guard (3) from above into the pre-punched slots
on the edge of the charcoal tray (4). Push the parts of the wind guard (3) together slightly in order to
introduce the catches into the slots. After you insert them, they sit firmly in the slots with a little tension.
Now connect the 2 parts of the wind guard (3) using 3 short screws (7) and 3 nuts (9).
Screw up the nuts (9) tightly.
6.2 Assembly step 2: Mounting the feet (5)
You will need 6 short screws (7), 6 nuts (9) and 3 plastic feet (10).
Screw the 3 feet (5) to the underside of the charcoal tray (4) by inserting 2 short screws (7) down
through the holes provided in the charcoal tray (4) into each of the feet (5) and then securing them
from underneath with a nut (9).
Screw up the nuts (9) tightly.
Place the plastic feet (10) onto the bottom ends of the stands (5).
6.3 Assembly step 3: Mounting the strut (6)
You will need 3 long screws (8) and 3 nuts (9).
Now mount the strut (6) between the feet (5) by guiding it between the feet (5) and securing it to the
holes in each of the feet (5) using a screw and a nut. In each case, guide a long screw (8) through the
hole in the foot (5) and then through the hole in the strut (6). Secure the connections with a nut (9) on
the inside.
Screw up the nuts (9) tightly.
6.4 Assembly step 4: Putting the grill tray (1) in place/Using the handle (2)
The grill tray (1) can be adjusted to 4 different heights.
To select a level, use the slots on the connection between the two parts of the wind guard (3). There are
also 4 open slots on the outer ends of the wind guard (3) that the grill tray (1) can be slotted into. When
choosing a height, make sure that all 3 supports are resting at the same height.
The handle (2) protects you from getting burned on the hot grill tray (1).
So it is vitally important that this handle (2) is not removed from the grill tray (1) once the grill
tray (1) has been placed on the hot charcoal in the charcoal tray (4). Otherwise it would get
very hot. Risk of getting burnt!
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grillmeister GRG33A1 - IAN 437783 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grillmeister GRG33A1 - IAN 437783 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info