708280
14
Zoom out
Zoom in
Previous page
1/210
Next page
13
English (original instructions)
SPECIFICATIONS
Product Specifications
Type 2400407
Motor 80 Volt DC
Air Velocity 200 km/h (Max)
Weight (Battery
Pack not included)
2.7kg
Battery Pack 2914907 / 2914607/2914507
Charger 2914707
Sound pressure
level
L
pA
: 88dB(A) k: 3 dB(A)
Sound power level
LWA: 96.2dB(A)
K3.0dB(A)
Vibration level Ah: 2.5m/s
2
, k:1.5m/s
2
DESCRIPTION
1. Battery Release Button
2. Trigger
3. ON/OFF Button
4. Speed Selection Button
5. Blower tube
6. 82V Lithium-lon battery
7. Unlock
8. Lock
9. Lock Position
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call your
Greenworks Tools service centre for assistance.
WARNING
Do not use this product if any parts on the packing list
are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
ASSEMBLING THE BLOWER TUBE See Figure 2.
WARNING
To prevent accidental starting that could cause serious
personal injury, always remove the batterypack from
the tool when assembling parts.
Align either of the grooves in the tube with the tabs
on the blower housing. Push the tube onto the blower
housing until the tab engages the grooves (Fig. 2).
Turn the tube in the direction of the arrow until both of
the tabs slide into the lock positions (Fig. 3).
For complete charging instructions, refer to the
Operators Manuals for your battery pack and
charger models.
NOTE: To avoid serious personal injury, always remove
the battery pack and keep hands clear of the variable
speed trigger when carrying or transporting the tool.
TO INSTALL/REMOVE BATTERY PACK See Figure 4.
TO INSTALL
Align the ribs of the battery pack with the mounting
slots in the blower’s battery port.
Insert the battery into the battery opening until the
battery release button locks into place.
CAUTION
When placing battery pack in the blower, be sure the
raised ribs on the battery pack align with the grooves
in the top of the blower. Make sure the battery is fully
seated, and it latches into place properly. Improper
installation of the battery pack can cause damage to
internal components.
TO REMOVE BATTERY PACK
Press the battery release button on the blower. This
will cause the battery to slightly protrude out of the
tool.
Grasp the blower firmly and pull the battery out of the
handle.
WARNING
Always take care of your feet, children, or pets around
you when pressing the battery release button. Serious
injury could result if the battery pack falls. NEVER
remove the battery pack when in a high location.
(See Figure 1)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks GD80BL - 2400407 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks GD80BL - 2400407 in the language / languages: All languages as an attachment in your email.

The manual is 23,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info