644658
29
Zoom out
Zoom in
Previous page
1/42
Next page
29
MAINTENANCE
NOTE: Make certain of direction of chain.
Position the chain so there is a loop at the back of the bar.
Hold the chain in position on the bar and place the loop around the sprocket.
bar.
NOTE: When placing the bar on the bar studs, ensure that the adjusting pin is in the chain tension pin hole.
Replace the chain cover.
Replace the sleeve and chain cover lock bolt; use a hexagon ring spanner to rotate bolt
clockwise to tension. The bar should still be free to move for tension adjustment.
Remove all slack from the chain by turning the chain tensioning bolt clockwise with a hexagon
ring spanner until the chain seat
s snugly against the bar with the drive links in the bar groove.
Lift the tip of the guide bar up to check for sag.
Release the tip of the guide bar and turn the chain tensioning bolt 1/2 turn clockwise. Repeat
this process until sag does not exist.
Hold the tip of the guide bar up and tighten the chain cover lock bolt. The chain is correctly
tensioned when there is no sag on the underside of the guide bar, the chain is snug, but it
can
be
turned by hand without binding.
NOTE: If chain is too tight, it will not rotate. Loosen the chain cover lock bolt slightly and turn the chain ten-
sioning bolt 1/4 turn counterclockwise. Lift the tip of the guide bar up and retighten the chain cover lock bolt.
Ensure that the chain will rotate without binding.
Fig. 30
Fig. 31
Fig. 32
Fig. 33
Cutters Chain Rotation
Chain Drive Links
Bar
GrooveChain Drive Links
0
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 20312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 20312 in the language / languages: English as an attachment in your email.

The manual is 16,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info