12
NiMH-Manuell-Programm
________________
________________NiMH-Manuell
L:2.5A
DECINC
+
-
Bei diesem Programm wird der Akku mit dem eingestellten
Ladestrom aufgeladen.
Der maximale Ladestrom kann vor dem Anstecken des zu
ladenden Akkus mit den INC / DEC-Tasten von 0,1A - 10,0A
eingestellt werden. Beachten Sie die Angaben des Akkuhers-
tellers! Laden Sie die Akkus auf keinen Fall mit mehr als 2C!
Bsp.: NiMH 6N-4200, max. Ladestrom 8,4A, empfohlener
Schnellladestrom für Graupner-Akkus 4,2A.
Senderakkus müssen auf max. 2A Ladestrom begrenzt wer-
den! Beachten Sie auch die Anleitungen bzw. den max. Ladest-
rom des Senders und des Senderakkus!
Die Ladeabschaltung erfolgt nach den eingestellten Werten für
„NiMH-Delta-Peak-Abschaltspannung“.
INC
________________
________________NiMH Zykl. L>E 1
L:2.5A E:1.00A
DEC
INC
+
-
DEC
INC
+
-
ENTER
DEC
DEC
INC
ENTER
NiMH-Entlade-Programm
________________
________________NiMH-Entladen
1.00A 4.8V
DECINC
+
-
DECINC
+
-
ENTER
NiMH-Formierungs-Programm
Dieses Programm dient z.B. zur Feststellung der Restkapazität
oder zur definierten Entladung eines Sender-, Empfänger oder
Antriebsakkus
Bei diesem Programm wird mit dem eingestellten Entladestrom
(0,1...5,0A, links im Display) bis zur eingestellten Entladeschluss-
spannung (0.1...16,8V, rechts im Display) entladen.
Als Entladeschlussspannungen sollten etwa 1,1 ... 1,2 V pro Zelle
gewählt werden um die Akkus nicht zu weit zu entladen und eine
evtl. Zellen-Umpolung zu verhindern.
Dieses Programm dient zur Optimierung von Kapazität und
Formierung einer Batterie.
Mit der INC oder DEC Taste stellen Sie oben rechts ein, ob das
Formierungsprogramm mit dem Laden oder Entladen beginnen
soll. Anschließend stellen Sie die Zyklenzahl von 1-5 ein (bei z.B.
3 Zyklen wird der Akku dreimal geladen und entladen). Das
Programm entlädt den Akku mit dem rechts im Display eingestell-
ten Entladestrom (0,1...5,0A) um ihn anschließend mit dem links
im Display eingestellten Ladestrom (0,1...10,0A) wieder aufzula-
den.
Die Lade-Abschaltung erfolgt nach den in den Einstellungen für
„NiMH-Delta-Peak-Abschaltspannung“.
Die Entlade-Abschaltung erfolgt nach der im NiMH-Entlade-
Programm eingstellten Entladeschlussspannung.
Das Auslesen des aktuellen Zyklenwertes ist im Abschnitt „Display-
anzeigen“ beschrieben.
oder