467066
14
Zoom out
Zoom in
Previous page
1/36
Next page
2524
NiCd-Delta-Peak (-
Peak)
trigger voltage
This process analyses the voltage peak of the charge curve, which indicates with great
accuracy when the maximum charge capacity is reached.When the charge process is started
the battery voltage initially rises continuously, but as the pack approaches full capacity it begins
to heat up. This in turn causes the battery voltage to fall slightly (Delta-V). The charger detects
and assesses the voltage decline.It is possible to adjust the sensitivity, or trigger voltage (in mV
per cell!) of the automatic cut-off circuit for Ni-Cd batteries. A practical range of values has
proved to be 10 … 30 mV / cell. Higher voltages often lead to overcharging of the battery,
whereas a lower voltage tends to result in premature termination of the charge process. We
recommend that you check the information supplied by your battery manufacturer, then carry
out a series of test charges to establish the optimum value for your battery.
The automatic charge termination
circuit (battery full detection) works on
the proven Delta Peak principle (also
known as the Delta-V process), which
is already in use in millions of chargers.
12. NIMH-programs
A set of convenient charge programs for recharging Nickel-Metal-Hydride batteries, as
commonly used for modelling purposes. When the charge / discharge program is finished, the
screen displays the name of the charge program alternating with the message „END“, together
with the charge time, the last (dis-) charge current, the charged-in (discharged) capacity and
the battery voltage, and continues to do so until you disconnect the battery. This information can
often give you a useful indication about the Ni-MH pack’s charge characteristics and capacity, or
warn you if the charger has incorrectly assessed the pack as being „full“.
NiMH
AUTOMATIC-
program
NiMH
balance
program
NiMH
MANUAL-
program
NiMH
discharge
program
NiCd
delta-peak
trigger voltage
MODE MODE MODE MODE MODE
Ni-MH manual program
________________
________________
NiMH manual
C:2.5A
DECINC
+
-
Ni-MH automatic program
___________ _____
___________ _____
NiMH automatic
C:2.5A limited
DECINC
+
-
In this program the charger detects the type of Ni-MH
battery connected to it, and adjusts the charge current
accordingly to avoid overcharging the pack.
The maximum charge current can be set
before you
connect the battery to be charged. This is done using the
INC / DEC buttons; the range available is 0.1 A to 7 A, or
no restriction. The charge process is terminated auto-
matically in accordance with the values already set for
„Ni-MH Delta Peak cut-off voltage“.
Select this program when you simply wish to recharge a
battery using the set charge current. You can adjust the
charge current using the INC / DEC buttons, but only
before you connect the pack for charging. The range
available is 0.1 A to 7 A.The charge process is terminated
automatically in accordance with the values already set
for „Ni-MH Delta Peak cut-off voltage“.
________________
________________
NiCd delta-peak-
volt =10mV/cell
DECINC
+
-
NiCd conditioning program
Ni-Cd manual program
Ni-Cd discharge program
___________ _____
___________ _____
NiCd manual
C:2.5A
DECINC
+
-
Select this program when you simply wish to recharge a
battery using the set charge current.
You can adjust the charge current using the INC / DEC
buttons, but only
before you connect the pack for
charging. The range available is 0.1 A to 7 A.
The charge process is terminated automatically in
accordance with the values already set for „Ni-Cd Delta
Peak cut-off voltage“.
The typical purpose of this program is to determine the
residual capacity of a transmitter, receiver or drive
battery, or to discharge the pack to a defined level.
In this program the charger discharges the pack using the
set discharge current (0.10 ... 100 A, left of screen) until
its voltage falls to the set final discharge voltage (0.5 ...
16.8 V, right of screen).The set final discharge voltage
should be a value of around 0.8 ... 1 V
per cell, in order to
avoid the pack becoming deep-discharged. Deep-
discharging a pack runs the risk of reversing individual
cells, i.e. they exhibit reversed polarity.
________________
________________
NiCd discharge
1.00A 4.8V
DEC
INC
+
-
DEC
+
-
ENTER
INC
Ni-Cd automatic program
___________ _____
___________ _____
NiCd automatic
C:2.5A limited
DECINC
+
-
In this program the charger detects the type of Ni-Cd
battery connected to it, and adjusts the charge current
accordingly to avoid overcharging the pack.
The maximum charge current can be set
before you
connect the battery to be charged. This is done using the
INC / DEC buttons; the range available is 0.1 A to 7 A, or
no restriction. The charge process is terminated auto-
matically in accordance with the values already set for
„Ni-Cd Delta Peak cut-off voltage“.
INC
This program is designed to optimise the capacity of a
battery, and balance the state of its component cells.At
top right you can set use the INC or DEC buttons to
determine whether the conditioning program is to start
with a charge or discharge cycle. After this you set the
number of cycles from 1 to 5 (e.g., if you set three cycles,
the pack will be charged and discharged three times). The
program discharges the battery using the set discharge
current stated on the right of the screen (0.10 .. 1.00 A),
and then recharges it using the charge current (0.1 ...
7.0 A) shown on the left of the screen. The charge
process is terminated automatically in accordance with
the values already set for „Ni-Cd Delta Peak cut-off
voltage“.The method of reading out the values for the
individual cycles is described in the section „Screen
displays“.
___________ _____
___________ _____
NiCd cycle C>D 1
C:2.5A E:1.00A
DEC
INC
+
-
DEC
INC
+
-
ENTER
DEC
DEC
INC
or
ENTER
cell voltage
charging time
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner Ultramat 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner Ultramat 12 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner Ultramat 12

Graupner Ultramat 12 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info