467066
13
Zoom out
Zoom in
Previous page
1/36
Next page
2322
9. Using the charger for the first time
When the ULTRAMAT 12 is initially connected to a 12 V car battery, the unit runs through the
information routine which provides you with a brief summary of the essential user settings. The
charger’s screen displays the following information in sequence:
The ULTRAMAT 12’s name appears on the screen.
The charger is now ready for use.
2 sec.
___________ _____
___________ _____
Graupner
ULTRAMAT 12
________________
________________
NiCd automatic
C:2.5A limited
11. Ni-Cd programs
A set of convenient charge programs for recharging Nickel-Cadmium batteries, as commonly
used for modelling purposes. When the charge / discharge program is finished, the screen
displays the name of the charge program alternating with the message „END“, together with the
charge time, the last (dis-) charge current, the charged-in (discharged) capacity and the battery
voltage, and continues to do so until you disconnect the battery. This information can often give
you a useful indication about the Ni-Cd pack’s charge characteristics and capacity, or warn you
if the charger has incorrectly assessed the pack as being „full“.
NiCd
AUTOMATIC-
program
NiCd
MANUAL-
program
NiCd
discharge
program
NiCd
balance
program
NiCd
delta-peak
trigger voltage
MODE MODE MODE MODE MODE
10. Starting the charge / discharge process
________________
________________
NiCd automatic
C:2.5A limited
For charging / discharging, or conditioning a pack, select
the desired program as described below, and then set
suitable values.
2 sec.START
________________
________________
BATTERY CHECK
WAIT PLEASE...
___________ _____
___________ _____
AUTO 23:40 00863
NC+2.50A 14,717V
2 sec.
Hold the START button pressed in for about two seconds,
and the charger will measure and assess the battery.
You can interrupt the charge process at any time with another
short press on the START button.
Note: if you interrupt the charge process by pressing
the START button, all display parameters are
irretrievably erased.
7. Program flowchart
6. Charge and discharge programs
The various facilities of the charger are divided up into four program groups which you can select by
holding the MODE button pressed in for two seconds. The sequence is shown in the flow chart
below.
Ni-Cd battery programs: charging, conditioning, discharging to determine capacity or residual
capacity, or to select cells.
Ni-MH battery programs: charging, conditioning, discharging to determine capacity or residual
capacity, or to select cells.
Li-Po / Li-Io battery programs: charging, discharging to determine capacity or residual capacity, or to
select cells.
Lead-acid battery programs: charging, discharging to determine capacity or residual capacity, trickle
charge for stand-by operation.
8. Selecting the charge program group
In the interests of clarity, the charge and set-up facilities of the
ULTRAMAT 12 are divided into four logical program groups.
A separate program group is provided for each of the different
battery types: Nickel-Cadmium, Nickel-Metal-Hydride, Lithium-
Ion / Lithium-Polymer and Pb (lead-acid) batteries.
A supplementary program group contains the individual adjust-
ment facilities for the charger overall.
Switching programs:
yy
yy
y Changing from one charge program group to another is not
possible if the charger is currently engaged in a charge /
discharge process.
yy
yy
y Changing from one program group to another is carried out using
the MODE button, which must be held pressed in for about two
seconds. A brief press on the MODE button makes changes within
the program group.
NiCd
AUTOMATIC
program
MODE
MODE
NiMH
AUTOMATIC
program
MODE
Pb
MANUAL
program
MODE
Lithium
MANUAL
program
MODE (2 sec.)
MODE (2 sec.)
MODE (2 sec.)
MODE (2 sec.)
NiCd
AUTOMATIC-
program
NiCd
MANUAL-
program
NiCd
discharge
program
NiCd
balance
program
NiMH
AUTOMATIC-
program
NiMH
balance
program
NiMH
MANUAL-
program
Pb
MANUAL-
program
Pb
discharge
program
Lithium
MANUAL-
program
Lithium
discharge
program
NiMH
discharge
program
Lithium
type
select
NiCd
delta-peak
trigger voltage
NiCd
delta-peak
trigger voltage
MODE MODE MODE MODE MODE
MODE MODE MODE MODE MODE
MODE MODE MODE
MODE MODE
MODE (2 sec.)
MODE (2 sec.)
MODE (2 sec.)
MODE (2 sec.)
MODE
(2 sec.)
MODE
(2 sec.)
MODE
(2 sec.)
MODE
(2 sec.)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner Ultramat 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner Ultramat 12 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner Ultramat 12

Graupner Ultramat 12 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info