637232

Graupner ULTRA TRIO PLUS 16 - 6469 Manual

44
Zoom out
Zoom in
Previous page
1/107
Next page
44
Pb manual program
In this program you can set the maximum permissible charge
current using the INC / DEC buttons, but only before you
connect the lead-acid battery for charging.
This setting only determines the top limit which the charger is
permitted to feed to the battery.
If the battery manufacturer states a low maximum charge current, then it is important to limit the charge
current to that value to avoid the charger setting a higher current if the battery appears to be willing
to accept charge.
The battery can then be connected to the charger and the charge process started: the unit starts
charging at 0.00 A and slowly raises the current until it reaches the set limit.
The charger constantly assesses the state of the battery during the charge process, and adjusts the
charge current to suit its condition.
The charge program automatically determines the number of cells (cell count) in the battery by measu-
ring its overall voltage.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
P b - C :
2 . 5 A
DECINC
+
-
14. Pb (lead-acid) programs (Output 1)
This program is designed for charging and discharging lead / sulphuric acid and lead / gel batteries with
nominal voltages of exactly 2, 4, 6 and 12 V (1, 2, 3 and 6 cells).
Caution: the charger will not recognize lead-acid batteries with other nominal voltages, and such bat-
teries must not be connected to it.
Lead-acid batteries behave entirely differently to Ni-Cd and Ni-MH batteries. Lead-acid batteries can
only deliver relatively low currents relative to their capacity, and similar restrictions very defi nitely apply
to charging. Manufacturers usually state 14 to 16 hours for achieving nominal capacity when rechar-
ging at the normal charge current. The „normal“ charge current is defi ned as one tenth of the battery’s
nominal capacity. Example: battery capacity = 12 Ah —> normal charge current = 1.2 A. In contrast
to Ni-Cd and Ni-MH batteries, lead-acid chargers generally monitor the battery’s voltage in order to
determine when it is fully charged.
Caution: lead-acid batteries cannot and must not be fast-charged! Always select the charge
current which the battery manufacturer recommends. Please also bear in mind that the nominal
capacity (i.e. useful life) of a lead-acid battery is very quickly compromised by incorrect handling, in-
cluding overcharging, repeated 100% discharges and, in particular, deep discharging. The magnitude
of the charge / discharge currents is also crucial to the actual battery capacity which can be exploited,
i.e. the higher the current, the lower the capacity which the battery can deliver.
The values selected in the user settings for charge termination delay and safety timer have no effect
in the Pb charge programs.
Pb
MANUAL-
program
Pb
discharge
program
MODE MODE
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
P b m a n u a l
2 sec.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner ULTRA TRIO PLUS 16 - 6469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner ULTRA TRIO PLUS 16 - 6469 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info