637232
36
Zoom out
Zoom in
Previous page
1/107
Next page
36
11. Ni-Cd programs (Output 1)
A set of convenient charge programs for recharging Nickel-Cadmium batteries, as commonly used for
modelling purposes. When the charge / discharge program is fi nished, the screen displays the name
of the charge program alternating with the message „END“, together with the charge time, the last
(dis-) charge current, the charged-in (discharged) capacity and the battery voltage, and continues to
do so until you disconnect the battery. This information can often give you a useful indication about the
Ni-Cd pack’s charge characteristics and capacity, or warn you if the charger has incorrectly assessed
the pack as being „full“.
NiCd
AUTOMATIC-
program
NiCd
MANUAL-
program
NiCd
discharge
program
NiCd
cycle
program
NiCd

delta-peak
trigger voltage
MODE MODE MODE MODE MODE
MODE
NiCd
discharge balan-
cing program
Ni-Cd manual program
Ni-Cd discharge program
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
N i C d - M a n
C : 2 . 5 A
DEC
INC
+
-
Select this program when you simply wish to recharge a
battery using the set charge current.
You can adjust the charge current using the INC / DEC
buttons, but only before you connect the pack for charging.
The range available is 0.1 A to 10 A.
The charge process is terminated automatically in accor-
dance with the values already set for „Ni-Cd Delta Peak
cut-off voltage“.
The typical purpose of this program is to determine the
residual capacity of a transmitter, receiver or drive battery,
or to discharge the pack to a defi ned level.
In this program the charger discharges the pack using the
set discharge current (0.1 ... 5.0 A, left of screen) until its
voltage falls to the set fi nal discharge voltage (0.1 ... 16.8 V,
right of screen).The set fi nal discharge voltage should be a
value of around 0.9 ... 1,1 V per cell, in order to avoid the
pack becoming deep-discharged. Deep-discharging a pack
runs the risk of reversing individual cells, i.e. they exhibit
reversed polarity.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
N C - D:
1 . 0 A 4 . 8 V
DEC
INC
+
-
DEC
+
-
ENTER
INC
Ni-Cd automatic program
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
N i C d - A u t o < 2 . 5 A
DECINC
+
-
In this program the charger detects the type of Ni-Cd battery
connected to it, and adjusts the charge current accordingly
to avoid overcharging the pack.
The maximum charge current can be set before you con-
nect the battery to be charged. This is done using the INC
/ DEC buttons; the range available is 0.1 A to 10 A, or no
restriction. The charge process is terminated auto-matically
in accordance with the values already set for „Ni-Cd Delta
Peak cut-off voltage“.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
N i C d d i s c h a r g e
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
N i C d m a n u a l
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
N i C d a u t o m a t i c
2 sec.
2 sec.
2 sec.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner ULTRA TRIO PLUS 16 - 6469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner ULTRA TRIO PLUS 16 - 6469 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info