637253

Graupner POLARON EX-1400 - GR-S2018 Manual

23
Zoom out
Zoom in
Previous page
1/29
Next page
English
English
INNOVATION & TECHNOLOGIE
44 45
3. Display “Date & time“
This screen is used to set the date and time *, and possibly two alarms.
After tapping the value to change, this can be changed with the INC / DEC but-
tons located at the bottom of the display. Tapping again the value eld stores
the changed value and deactivates the input eld again.
An alarm can be activated by switching from OFF to ON and vice versa ena-
bled. The set time triggered alarm is stopped by tapping the screen, but re-
mains active as long as it is not disabled in this menu.
* The abbreviations “AM” (ante meridian = before noon) and “PM” (post meridiem = after noon) derived from Latin
and are used among others in the English language.
4. Display “Username and Options“
Parameter Short description
Username Tap this line, the display opens to enter a user name.
Proceed as described under “Entering a battery name “ on
page 18.
Options This menu is disabled at the time of the revision of this
manual, but should be activated with the next update.
Menu STORAGE
In the menu “PROFILE” you have stored the data of your batteries and this adds to the menu
“CHARGE” and “DISCHARGE” to the charge or discharge parameters. The charger charges or
discharges your lithium battery to its storable state based on these parameters.
The default value in the line “storage voltage” gives a battery about 60% of its capacity.
The selected memory location is displayed at the top of the screen and, once this eld is highlight-
ed in blue by touching with a nger or the supplied pen, it can be selected individually. Similarly
proceed with the other options elds of this display.
If you set [N-STORE] the CC / CV is applied and if you set [Q-STORE], then FAST-charge method
is applied.
.
Parameter* Short description
Mode NORMAL or FAST
Cell count Specication of cell voltage for the storage mode
Charge current Charge current value
Discharge cur-
rent
Discharge current value
Starting the process is like any other, possible steps as described under
“Charge” on page 18, “Discharge” on page 24 or “Cycle” on page 28.
<Factory settings>
Press and hold the push button placed under the display and turn on the
charger. After a short time, the display will appear as shown on the left.
Display “1. Factory reset“
Tapping the “1. Factory reset “ button, as shown above, launches a reset of the
Graupner polaron EX-1400 charger.
ATTENTION!
The factory reset starts after pressing the button WITHOUT
FEEDBACK!!! All data and settings will be cleared and the de-
vice will be reset to factory settings!!!
During the battery charger reset to the factory settings it will be shown alter-
nately in red and blue the script, “initialize data ...”, as shown at left.
After successfully reset the charger restarts automatically.
Display “2. Display calibration“
Tapping the “2. Display Calibration“ button, as shown above, opens the display as shown below. In
this one you will be asked three times to tap the center of the red cross.
Afterwards the cross changes twice its position and promptly you have to triple tap on it, see mid-
dle and right of the three images below:
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner POLARON EX-1400 - GR-S2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner POLARON EX-1400 - GR-S2018 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info