747909
18
Zoom out
Zoom in
Previous page
1/28
Next page
18 / 28
S1006.PRO_jh_V1
Control sticks length adjustment
Length of both control stick can be adjusted. Hold down the
bottom half of the knurled grip, and loosen the screwed connec-
tion by turning the top part:
You can now lengthen or shorten the control stick by screwing
it up or down. Then clamp the top and bottom part of the grip
by rotating them against each other.
Transmitter power supply
Low voltage warning
The transmitter battery voltage should be monitored in the LCD
display during operation. Once the adjustable voltage in the
"battery warning threshold" is reached in the "Etc.Set" submenu
of the system menu, a standard 3.6 V (lith.) for the mz-24 PRO
HoTT transmitter, a warning beep sounds, and the following
window appears in the display:
Now at the latest, stop operation and recharge the transmitter
battery!
Binding
Explications about the binding process can be found in
the Part 2 of the manual.
For a transmitter commissioning the receiver must be bound to
the transmitter. This binding process is necessary for the oper-
ation of the model!
The exact sequence of the binding operation is described in the
section “Binding” in the Part 2 of the manual and in the respec-
tive receiver manual. Note: The procedure will be different for the
different receiver types.
Charging the transmitter battery
WARNING
Protect the charger from dust, dirt, moisture, vibrations and
other foreign parts.
The charger should always be supervised during charge and
it should be used only in rooms fitted with a smoke detector.
The charger and the battery to be charged must be placed
on a non-combustible, heat-resistant and non-conducting
surface during operation. Do not use the charger near easily
flammable materials.
Verify if the charger is suitable for your battery type.
Always connect only one battery to the battery charger out-
put.
RÜCK
CLR
EIN
S. VOLT
04
3.5V
NEU LADEN
E. VOLT
00
3.7V
FELD ST.
00
000%
ESC STR
00
000.0A
ESC VOLT
00
00.0V
ALARM FELD ST.
EIN
!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-24 PRO - S1006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-24 PRO - S1006 in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-24 PRO - S1006

Graupner MZ-24 PRO - S1006 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info