747909
16
Zoom out
Zoom in
Previous page
1/28
Next page
16 / 28
S1006.PRO_jh_V1
Commissioning
Settings by the first use
Switch on transmitter
When you switch on the transmitter the position of the servos
connected to the outputs 1 (plane) and 6 (heli) are checked. If
the servo position is out of the idle range, the RF module will
remain Off.
If this is not the case, the RF module will be activated and the
image on the left will appear.
At the same time a warning alarm will be emitted.
You now have the option of waiting a few seconds until the dis-
play disappears or maintaining the RF transmissions by manu-
In the base display you can check if the RF module is on or off.
The related symbol is on the upper left side of the display.
The red "RX" and green "TX" on the left and right of this switch
symbol mean that the currently active model memory has once
been linked to a Graupner-HoTT receiver but is presently not
linked.
If there is a connection, it will be indicated by a green colored
numeric indication of the actual voltage of the receiver power
supply in the field near "RX" and "TX".
If the transmitter is turned on while the RF transmission is off, all
of this information is not displayed, and the high-frequency
switch symbol is gray.
If it appears the display represented on the left after switching
the transmitter on, the currently active model memory is not
linked to any receiver. By pushing the SET button you arrive to
the "Transmitter settings" menu, in which you can bind the trans-
mitter.
WARNING
Thr.HOLD
Thr.POS
Thr.CUT
QLink
Please select RF ON/OFF
Normal signal Fail Safe not set
ON
OFF
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
MODEL NAME 1
M - 1
PHASE 1
000:00.0
000:00.0
4.2V
0:01:23
TX RX
RX 05.5V
WARNING
Thr.HOLD
Thr.POS
Thr.CUT
QLink
No Receiver bound to TX
SET
Fail Safe not set
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-24 PRO - S1006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-24 PRO - S1006 in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-24 PRO - S1006

Graupner MZ-24 PRO - S1006 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info