637251

Graupner MZ-12 HoTT - S1002 Manual

8
Zoom out
Zoom in
Previous page
1/77
Next page
10. WHAT IS HoTT
11. BATTERY INSTALLATION
HOPPING TELEMETRY TRANSMISSION(HoTT)
it is Graupner’s unique telemetry technology in 2.4GHz signal protocol that support Bi direction-
al data transmission gives user real-time information on things like user model’s RPM, Voltage,
Temperature, User programmed warning, and etc. The use of up to 75 channels ensures ex-
treme operating reliability and immunity to external interference thanks to optimized frequency
hopping broad channel sequence.
Optional NiCd or NiMH 1.2-volt AA rechargeable 4-cell batteries can be used. A battery con-
necter is on the inside of the transmitter for convenient recharging. Graupner offers rechargea-
ble NiCd, NiMH batteries, part number S22331.
Remove the battery cover and install the battery pack
ensuring the polarity of the battery connecter.
The included charger is designed to recharge your batteries at a rate of 150mA. Do not use
this charger for equipment other than Graupner transmitters that use 4-cell battery packs.
The charging plug polarity may not be the same and equipment damage can result. During
the charging operation, the charger’s temperature is slightly elevated. This is normal.
The mz-12 is compatible with all current Graupner Aircraft receivers ( R Series )
• CHARGING BATTERIES
Charge only rechargeable batteries.
Non-rechargeable batteries may burst
causing injury to persons and/or dam-
age to property. Never leave charging
batteries unattended.
Graupner
Transmitter Charge Jack Polarity
CAUTION
The Spring Strength Adjustment of Elevator, Aileron and Rudder Stick.
According to your preference, you can adjust the spring tension by tightening the related screws
for elevator, aileron and rudder stick.
There are related screws beside return-spring as below picture.
You can tighten the related screws for tension its adjustment (elevator, aileron and rudder).
There are the screws at the black-colored circles. You can tighten the screw for stronger and
loosen for smoothly.
Please refer to the below picture, you can adjust the screw.
12.
BINDING
1. With the transmitter on and the home screen displayed, press the ENT button.
You must bind the receiver to the transmitter before the receiver will operate. Binding
teaches the receiver the specific code of the transmitter so that it will only connect to
it’s corresponding transmitter.
ENT
ESC
TEL VIW
press
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-12 HoTT - S1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-12 HoTT - S1002 in the language / languages: English as an attachment in your email.

The manual is 13,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info