637251
5
Zoom out
Zoom in
Previous page
1/77
Next page
5. SPECIFICATION 7. ADJUSTABLE STICK LENGTH
6. DISPLAY EXPLANATION
- Function Help
8. ADJUSTABLE STICK TENSION
The control stick is consisted of 2pc of stick levers and it allows you to adjust the control
stick’s length as you want.
1. Receiver signal indicator
2. Button Lock status
3. Battery voltage of receiver
4. Timer
5. Flight timer
6. Trainer indicator
7. Q. LINK
8. Aileron trim
9. Throttle trim
10. Transmitter type
11. Elevator trim
12. Rudder trim
13. Model type
14. Battery voltage of transmitter
15. Model name and model memory
16. Model type
1. Hold the lever Band turn the lever “A
counter clockwise. Lever “BThe lock will be
released.
2. Turn the lever “B” and adjust the control
stick’s length as you want. Turn the lever
A” clockwise, then the lever “Aand B” are
interlocked and fixed.
The mz-12 offers adjustable tension on the throttle, aileron, elevator and rudder sticks.
1. Remove the battery cover and battery form the transmitter
2. Unscrew the six Philips head screws that hold the transmitter’s rear cover and remove the rear
case.
3. Using a Philips screw driver, adjust the stick tension screw for the desired control.
Clockwise to tighten and counter clockwise to loosen.
Button Lock function
This function is used to prevent from pressing buttons accidently during flight.
Press both of TLM and VIEW buttons at the same time to lock the buttons. If you press
both of TLM and VIEW buttons at the same time again, the lock function is turned off.
Transmitter type
- NR (Normal) : When transmitter is operated in the normal mode
- T.T ( Trainer) : When transmitter is operated in the trainer mode
If Jack select programming is set to DSC at Basic sett, there is no display
Frequency band
Modulation
Output power
Current drain
Operating voltage
Transmitter mz-12
Receiver 8 Ch
2.4~2.4835GHz
FHSS
100mW
Approx 125mA
3.4V~6V
2.4~2.4835GHz
FHSS
-
Approx 70mA
3.6V~8.4V
5
16
15
14
13
12
3
4
5
6
7
8
911
10
1
2
Lever “A”
Lever “B
Aileron tension
Rudder tension
Elevator tension
Elevator tension
Rudder tension
Aileron tension
Model 2
Model 1
10
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-12 HoTT - S1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-12 HoTT - S1002 in the language / languages: English as an attachment in your email.

The manual is 13,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info