30127
88
Zoom out
Zoom in
Previous page
1/144
Next page
40 System Mode
ELEV D/R
The flap channel operates from the elevator dual rate
switch.
FLAP LVR
The flap channel operates from the left flap lever and is
proportional.
Accessing the Modulation Function (For Helicopter)
Dual Rates
D/R INDIVID (default)
In this mode the aileron and elevator rates are inde-
pendently selected using the ELEV D/R and AILE D/R
switches.
Note: In this mode the rudder D/R is always in the 0
position and is not selectable. This is the default
setting.
COM AILE
In this mode the aileron, elevator and rudder dual rates
are combined on the AILE D/R switch.
COM ELEV
In this mode the aileron, elevator and rudder dual rates
are combined on the ELEV D/R switch.
COM R-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper right (flap) switch.
COM L-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper left (gear) switch.
Gear Channel
LEFT SW (default)
The gear channel operates from the left upper (gear)
switch.
AILE D/R
The gear channel operates from the aileron dual rate
switch.
COM AILE
In this mode the aileron, elevator and rudder dual rates
are combined on the AILE D/R switch.
COM ELEV
In this mode the aileron, elevator and rudder dual rates
are combined on the ELEV D/R switch.
COM R-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper right (flap) switch.
COM L-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper left (gear) switch.
Gear Channel
LEFT SW (default)
The gear channel operates from the left upper (gear)
switch.
AILE D/R
The gear channel operates from the aileron dual rate
switch
ROCKER
The gear channel operates from the right rocker switch
and offers three positions.
INHIBIT
The gear channel is inhibited and is centered making it
useful as a slave channel for mixing.
RIGHT SW
The gear channel operates from the right upper (flap)
switch.
Flap Channel
RIGHT SW (default)
The flap channel operates from the right upper (flap)
switch.
LEFT SW
The flap channel operates from the left upper (gear)
switch.
Switch Select
The mx-12 allows the several options to be programmed
for the dual rate, gear and flap switches (flight mode
switches for heli).
Aileron and Elevator dual rates can be programmed to
be individually selected via its own switch (individ) or the
aileron, elevator and rudder functions can be combined
to operate from one of four switches.
The gear channel can be programmed to operate on
one of four switched or rockers or it can be inhibited,
helpful for some types of mixing. Plus the flap channel
(flight mode channel for heli) can be programmed to
operate from switches or levers.
Dual Rate indicator
Gear Indicator
Flap indicator (Flight mode indicator for heli)
Go to Wing Type menu for
Airplane (to Swashplate type
menu for Heli)
Go to Trainer menu
Select function
Switch selection
Reset selection to Default
Accessing the Modulation Function (For Airplane)
Dual Rates
D/R INDIVID (default)
In this mode the aileron and elevator rates are inde-
pendently selected using the ELEV D/R and AILE D/R
switches.
Note: In this mode the rudder D/R is always in the 0
position and is not selectable. This is the default
setting.
System Mode
Switch Select
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX12 in the language / languages: English, German, French as an attachment in your email.

The manual is 15,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX12

Graupner MX12 User Manual - English - 48 pages

Graupner MX12 User Manual - Dutch - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info