467107
196
Zoom out
Zoom in
Previous page
1/200
Next page
196
Appendix
Graupner|SJ HoTT Smart-Box
Order No. 33700
A vast range of different functions combined in a single device: that’s
what destines the SMART-BOX to be your intelligent companion in
future. Whether you want to display telemetry data in real time, or
enter changes to your HoTT system, the large-area screen with 8 x 21
characters makes the task simple. The flexible Smart-Box includes an
integral buzzer for generating audible signals and warnings for even
greater flexibility and practicality.
The installation set supplied makes it easy to mount the unit on the
support bars of hand-held transmitters, allowing you to position it in
such a way that you can read off telemetry data in real time while you
control your model.
The user-update facility ensures that the SMART-BOX is always up-to-
date, and provides a route for expanded functions in future.
Transmitter voltage display with •
user-variable warning threshold
Country setting•
Range check• Signal quality•
Receiver temperature• Receiver voltage•
Servo reverse• Servo neutral position•
Servo travel• Cycle time•
Channel swap• Fail-Safe settings•
Mixer settings• Servo test•
Dimensions: approx. 76 mm x 72 mm x 17 mm (L x W x H)
Weight: approx. 55g
Graupner|SJ HoTT magnetic rev-count sensor
Order No. 33616
For connection to the General-Engine module (Order No. 33610),
General-Air module (Order No. 33611) or Electric-Air module (Order
No. 33620).
The number of blades must be selected beforehand in the module’s
Telemetry menu.
Graupner|SJ HoTT optical rev-count sensor
Order No. 33615
For connection to the General-Engine (Order No. 33610), General-Air
(Order No. 33611) or Electric-Air module (Order No. 33620).
The number of blades must be selected beforehand in the module’s
Telemetry menu.
Graupner|SJ HoTT USB interface
Order No. 7168.6
This USB interface is required in conjunction with the adapter lead,
Order No. 7168.6A (available separately) for updating receivers and
sensors. The mx-16 HoTT transmitter can be updated directly using
the USB lead included in the interface set.
Graupner|SJ HoTT adapter lead
Order No. 7168.6A
This adapter lead is required in conjunction with the USB interface,
Order No. 7168.6 (available separately) for updating receivers and
sensors. The mx-16 HoTT transmitter can be updated directly using
the USB lead included in the interface set.
196


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info